Comparing the B&W Turnoverball Gooseneck Hitch Part # BWGNRK1016 and Part # BWGNRK1016-5W

Question

Question:

What are the differences between these two units?

asked by: Brett

0

Expert Reply:

There is no difference between the B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BWGNRK1016 and part # BWGNRK1016-5W. They are the exact same hitch but with different parts numbers. This hitch is a confirmed fit for your 2016 GMC Sierra 3500.

expert reply by: Conner L

0

Answer 1

The answer to your question will depend on which B&W Companion you have and whether or not you have the OEM prep package right now or not. I also don't know which bed size you have but I will assume it will remain the same between the old and…

view full answer...

Answer 2

There is definitely a way you can tow a 5th wheel trailer with your 2016 Chevy Silverado 2500 short bed which already has the B&W Turnoverball Gooseneck Hitch #BWGNRK1016-5W, although there isn't an underbed system with pucks which will work…

view full answer...

Answer 3

Based on the pictures you provided you most likely have the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000lbs #BWGNRK1111. You definitely lucked out having a B&W gooseneck hitch because you'll be…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Comparing the B&W Turnoverball Gooseneck Hitch Part # BWGNRK1016 and Part # BWGNRK1016-5W

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching