Does Yakima Fullback # Y02634 Fit 2018 BMW X3 with Spoiler

Question

Question:

Will this rack fit my vehicle and not ruin spoiler?

asked by: Robin

0

Expert Reply:

I checked with Yakima and the Fullback 2 part # Y02634 is a confirmed fit and would not damage the spoiler. If you check out the picture I attached that shows this rack installed on an X3 like yours you'll see that the strap does not put a lot of downward force on the spoiler.

If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Kuat Bike Frame Adapter Bar # UB01 to provide a horizontal top tube on your bikes to provide an attachment point. I attached a review video for this product also. This will allow the bikes to be carried more level and will provide more ground clearance.

expert reply by: Jameson C

0

click to enlarge

Mc

7/24/2025

But does it have to be in anchor mode or can I install the hook to the spoiler on the outside

Jameson C.

7/25/2025

@Mc Do you also have a 2018 BMW X3?

Mc

7/26/2025

@JamesonC mine is 2019

Jameson C.

7/27/2025

@Mc Yakima recommends having the upper and lower hooks installed in anchor mode. Here's the full install notes: Outer/lower support frame rests on the lower portion of the license plate or well. When bikes are loaded, re-tension straps to ensure base pads only make contact with the vertical surface of the well or plate. Do not use rear wiper when carrier is installed. Yakima Hangout 2 trunk mounted rack max load of 60lbs. 30 lbs per bike. Yakima HalfBack 2 and FullBack 2 trunk mounted racks max load of 75lbs, 35 lbs per bike. Yakima 3 bike trunk mounted racks weight limit for 2 bikes is 60 lbs. / 3 bikes is 90 lbs. For this vehicle; Yakima Halfback, Fullback, and Hangout products require that the upper and lower hooks must be changed and installed in anchor mode. See instructions for anchor mode implementation. The headliner and or trunk liner on this vehicle may deform or be damaged under prolonged contact with this rack in anchor mode. Yakima Halfback, Fullback, and Hangout products require this rack installed in anchor mode. Anchor Hooks must be placed on floor of cargo area before closing hatch.

Answer 1

I have a great trunk bike rack choice for you! However, all Thule OutWay models like the platform style #TH65JV or the adjustable arms style #TH45JV do not fit your 2020 Acura RDX. With that being said, the Yakima FullBack 2 #Y02634 and FullBack 3…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 9

Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…

view full answer...

Answer 10

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 11

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Answer 12

Hey Aaron, great question! The Trailer Mate Trailer Hitch Receiver #TMT67FR is definitely a budget friendly option for a hitch on your 2026 Highlander. This is basically the economy line from Curt. The welds are a little different (but will still do…

view full answer...

Does Yakima Fullback # Y02634 Fit 2018 BMW X3 with Spoiler

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching