Hitch Recommendation for Rockwood Mini Lite 2109S Pop Up

Question

Question:

Im looking for the best available Class 3 Hitch to mount to frame of this travel trailer.

asked by: Skip R

0

Expert Reply:

Our most universal hitch for fitting your Rockwood Mini Lite 2109S would be the Curt part # 13703 that you referenced. You'd need to measure the frame of your trailer, but as long as it measures between 22 and 72 inches outside to outside this will fit and work well.

expert reply by: Jameson C

0

Answer 1

When looking for a Weight Distribution (WD) system you will first need to figure out the Tongue Weight (TW) of your fully loaded and ready-to-go trailer. You will then take that and add the weight of any cargo behind the rear axle of your tow…

view full answer...

Answer 2

If your 2006 Dodge Ram 2500 has a factory 4-Way or 7-Way at the back then you just need the Wiring Adapter #3020-P to connect the Tekonsha Prodigy P3 #90195. If your truck didn't come with factory wiring then we need to build from the ground up…

view full answer...

Answer 3

Your best option is going to be the Reese Strait Line part #RP66084 as it has a tongue weight range of 600-1,200 lbs which would be perfect for your tongue weight of 725 lbs. The sway control on this system is the only style on the market that…

view full answer...

Answer 4

For your 2022 Forest River Rockwood Mini Lite 2516S I am going to recommend the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET. This hitch is rated for tongue weights of 800-1,200lbs and a maximum trailer weight of 12,000lbs. With…

view full answer...

Answer 5

The best way to pick out a weight distribution system for your 2014 Ram 1500 is to base it off of the loaded tongue weight including the weight of any cargo behind the rear vehicle axle. Since your unloaded tongue weight is 446 lbs the Strait Line…

view full answer...

Answer 6

My personal favorite Weight Distribution (WD) systems are the Reese Strait-Line because they are one of the few systems that actually fight sway before it starts instead of correcting it after it has initiated. You want to choose a WD system with a…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Hitch Recommendation for Rockwood Mini Lite 2109S Pop Up

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching