Yakima HardTop SL Roof Rack # Y01618 Hardware

Question

Question:

Does this kit come with plusnuts or capnuts? Or something else?

asked by: Darren R

0

Expert Reply:

The Yakima HardTop SL Roof Rack - 60" CoreBar Crossbars - 54" Tracks Y01618 comes with the capnut hardware to install it. It utilizes the Replacement Capnuts, Washers and Bolts for Yakima 60" Tracks Hardware Kit # Y8810155. I recommend using the lock core kit # Y07204 to secure the towers to your tracks.

expert reply by: Jason S

0

Answer 1

Hello TG, Your set-up looks AWESOME! I am really digging the color of your Lariat! I wasn’t too familiar with the Leitner over-the-bed rack system, so I reached out to Leitner to make sure it would work. They were kind enough to share their T-slot…

view full answer...

Answer 2

I do have an option for you but there would be no way to attach a Rhino-Rack Pioneer Platform Rack like part #RR52TB to the roof rack you have on your truck cap. The crossbars are not in the correct location spread wise and the internal channels are…

view full answer...

Answer 3

In order to mount the Yakima LockNLoad Platform Roof Tray part #Y05045 on a truck bed camper shell I recommend using the Yakima HardTop SL Roof Rack part #Y01618 because it's a complete all around system that has everything that you need. It…

view full answer...

Answer 4

We have exactly what you're talking about with the Rhino-Rack Pioneer Platform Rack for Camper Shells - Track Mount #RR67QX! This rack comes with feet and adapters designed to fit the Thule rails you have on your 2021 Taxa Mantis Overland, but…

view full answer...

Answer 5

The Rhino-Rack Pioneer Platform Roof Tray - Aluminum - 60" Long x 54" Wide #RR95TB that you mentioned requires Rhino-Rack crossbars. You would also need Pioneer Platform Mounting Kit #RR43105. You can provide us with your vehicle's…

view full answer...

Answer 6

I recommend Yakima HardTop SL Roof Rack part #Y01618 that includes the track, feet and cross bars for your camper shell. This roof rack is the highest capacity available for a camper shell at 220 lbs, so as long as you do not exceed that you…

view full answer...

Answer 7

Yes most of the T@G campers I have seen use the Yakima 54" Tracks for Roof Racks part #Y01127 base tracks. You can get evrything you need in one kit with the Yakima HardTop SL Roof Rack - 60" CoreBar Crossbars - 54" Tracks part #Y01618…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Yakima HardTop SL Roof Rack # Y01618 Hardware

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching