Difference Between Pro Series Trailer Jack # PS1400800383 and Bulldog Trailer Jacks

Question

Question:

I was wondering about the quality of these pro series jacks. I notice they run about half as much as a comparable Bulldog jack. Are they pretty decent? Why such a price disparity? Thanks,

asked by: John B

0

Expert Reply:

I have not heard of any complaints from customers about the Pro Series Trailer Jacks. The # PS1400800383 jack features a zinc plated inner tube and the jack is constructed of steel.

The Pro Series # PS1400800383 is comparable to the Bulldog Square Jack # BD190754. Both of these jacks have similar construction and have the same weight capacity of 8,000 lbs.

The main reason for difference in price points for each jack is the warranty on the jacks. The Pro Series Jack has a 3 year warranty, while the Bulldog Jack has a 5 year warranty. Also the manufacturers have varying production costs for their jacks, and also with different brand names, comes different prices.

expert reply by: Reno H

0

Answer 1

The inner diameter of the Replacement Bearing for etrailer and Ram Square Jacks #TJD-7000-BR is 0.756 inches and the outer diameter is 1.519 inches. When measuring a bearing you will definitely want to use calipers and be as specific as possible.

view full answer...

Answer 2

I can help you with greasing up your EZ Lube Axle. First thing I would check would be that the grease is not coming out of the back of the axle through the seal. If this is the case you will need to replace the seal. Our tubes like #L11390 have 14…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 8

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 11

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 12

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Difference Between Pro Series Trailer Jack # PS1400800383 and Bulldog Trailer Jacks

Continue Researching