Will Curt Fifth Wheel Rail Kit Fit RBW Lil Rocker Hitch

Question

Question:

Will these rails work with an RBW li’l rock’r 15k hitch? If not are there any universal rail installation kits that would work with that hitch?

asked by: Logan

1

Helpful Expert Reply:

Yes, the Curt Universal Fifth Wheel Base Rails with Installation Kit # C16100 is compatible with the an RBW Lil Rocker fifth wheel hitch like you mentioned. This kit provides the same style of industry standard fifth wheel rail that the Lil Rocker is designed to fit.

expert reply by: Jameson C

1

Answer 1

The RBW Little Rocker 5th wheel hitch is designed to mount to industry standard rails. The B&W Custom Base Rails, #BWRVK2602, are above the bed 5th wheel industry standard rails. The RBW hitch will work well with these base rails on your 2017 Ram…

view full answer...

Answer 2

We offer the Reese Universal Base Rail and 10-Bolt Installation Kit, part #RP30035. This kit is fully compatible with your RBW Lil Rocker 5th wheel hitch and includes all hardware, L-brackets and above-bed base rails. I have included links to an…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 6

Thank you for the photo of your 2016 Ram 3500's bed rail which sits 59-inches above ground. You are correct that the recommended minimum clearance between a bed rail and the underside of the trailer's overhang is 5 to 6-inches, as shown in…

view full answer...

Answer 7

As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…

view full answer...

Answer 8

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 9

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 10

Hey Heath, thanks for reaching out! The Curt A20 #C55DR and the B&W Companion #BWRVK3670 you're looking at are both excellent 5th wheel hitches, but I have to go with the Companion in this case simple because it is more robust and has a…

view full answer...

Answer 11

Great questions! Reese actually makes the OEM puck system for Ford so if the 2022 F-250 is cheaper by a lot then I recommend going that route and installing the Under-Bed Rail and Installation Kit #RP87FR. The only thing you'll really be missing…

view full answer...

Answer 12

Hi Bob; is your Patriot the slider #BWRVK3270 you looked at or the fixed #BWRVK3255? I know you said fixed mount hitch but since you looked at the slider I want to be sure. If it is the fixed hitch you can use the Adapter Rails for Curt 5th Wheel…

view full answer...

Will Curt Fifth Wheel Rail Kit Fit RBW Lil Rocker Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching