Adapter Recommendation to go From 50 Amp Power Source to 30 Amp Camper

Question

Question:

My trailer requires 30amp. One of the campgrounds i would like to visit only has 50 amp boxes. Which adaptor fo I need? Or can tjis be done safely?

asked by: John B

0

Expert Reply:

The exact adapter you'd need is the part # A10-5030AVP. This adapts your RV's 30 amp power outlet to the 50 amp power source at your campgrounds.

expert reply by: Jameson C

0

Answer 1

Hi Brian, great question! The adapter part #A10-5030AVP can plug directly into the 50A receptacle, then plug your 30A surge protector into the adapter, followed by your RV’s power cord. That would work just fine, however I still recommend a dog bone…

view full answer...

Answer 2

The best option is to use a 30 amp surge protector like the Camco RV Power Defender Circuit Analyzer Dogbone #CAM55312, but if you really wanted to use the 50 amp surge protector #SU99SR you'll just need to use the: -Mighty Cord RV Power Cord…

view full answer...

Answer 3

I have a solution for you, but we don't have a twist lock version of the adapter you're looking for. Instead, you can use the Mighty Cord #A10-5030AVP to adapt your 30 amp plug for use in a 50 amp receptacle. I've linked a short video…

view full answer...

Answer 4

The 90 degree portion of the EZ Coupler RV Sewer Hose Kit #D04-0115 is a separate piece but the part that fits in the dump station inlet is attached to it. I included a picture showing this close up.

view full answer...

Answer 5

Hey welcome back, Jody. So your best option here will be to get a new 50 amp surge protector for your new travel trailer. If you did end up at a camp ground with 50 amp service you would want to have it. I know a lot of sites do have just 30 amp but…

view full answer...

Answer 6

Hey Michele. The MORryde Easy Reel Spooler item #MR47RR, you were looking at, can be used with a hardwired cord. I've attached a screenshot from the instructions that shows you how to do it. I've also linked the entire user manual below. The…

view full answer...

Answer 7

Hey Greg. Since your 2019 Pace Arrow LXE 38K is a class A motorhome with a diesel engine, TireMinder says you need to mount the repeater, included with item #TM98FR, as close to the rear axle as possible. Their website specifically states to avoid…

view full answer...

Answer 8

The replacement motor for your Lippert Venture VMC940RB would be the Replacement Motor for Stromberg Carlson Electric Landing Gear Set #LC196308. The Replacement Gearbox #LC276602 is correct too if you needed that as well.

view full answer...

Answer 9

We do not have this item in stock for me to measure its thread pitch but two of us estimated it as being 6 or 7 threads per inch. I linked a photo of the instructions to replace this part. The bearing is removable and is available as a replacement…

view full answer...

Answer 10

The connector for the SmartPlug RV Power Inlet and Connector #SM87FR is designed to work with three 10AWG wires along with their casing. The port is designed for 10AWG wire as well but can handle 8AWG.

view full answer...

Answer 11

I spoke with the manufacturer of the SmartPlug RV and Marine Power Inlet and Connector #SM67FR and for your application they actually recommend using 6 AWG wire to properly supply your RV with power from the shore power pedestal.

view full answer...

Answer 12

Hi James, To my knowledge the Reese Goosebox is the only replacement option that won't void the frame warranty. That being said, the frame warranty is typically only a year so you really aren't losing much voiding it, especially if you've…

view full answer...

Adapter Recommendation to go From 50 Amp Power Source to 30 Amp Camper

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching