Customers compare TMX77FR to these similar products
Products Featured in this Video
Hi, everybody, Andy here with etrailer.com, and today we're gonna take a look at this TRIMAX dual-purpose coupler lock and U-lock. With this universal coupler lock, you're gonna be able to keep your unattended trailer safe from theft. This universal coupler lock is going to fit 1 7/8-inch, two-inch, and 2 5/16-inch ball couplers. I do happen to have a coupler here that fits two-inch balls. I just… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The 1/2" Trimax Dual Purpose Coupler Lock #TMX77FR measures 4" across to the U-Shaped locking pin. We also have the 9/16" Trimax Dual Purpose Coupler Lock #TMX67FR and Trimax Dual Purpose Coupler Lock with Ballistic Grade Nylon Housing…
view full answer...Yes, the Redarc Tow Pro Liberty part #RED52VR can install in your 2023 Ford Ranger that has the factory 7-way. It would wire directly to the brake controller install wiring that is present under the dash.
view full answer...Yes, the Draw-Tite Ball Mount part #DT49MR comes with a pre-torqued 2" hitch ball as well as a 5/8" diameter hitch pin and clip. It comes ready to go and use.
view full answer...I can confirm for you that your 2019 Ford Ranger with the factory 7-way is indeed compatible with the Tow-Pro Liberty that comes with the wiring harness, which is the following part number: - Redarc Tow-Pro Liberty Brake Controller w/ Universal…
view full answer...I won't be able to confirm exactly what ramp you need as I have no sort of database to reference for this but we do have a wide selection of ramps to choose from such as the Gen-Y Hitch Aluminum Loading Ramp Set part #GY52YR. These ramps measure…
view full answer...Thanks for all of the dimensions you listed! Based on that the correct bearing kit you'd need is the #BK3-200.
view full answer...I wasn't able to find anything with that part number, but if you have a Seismic series sofa, then you'd want the Replacement Power Cord with Power Supply Box for Thomas Payne Seismic RV Power Reclining Sofas #195-000111, but if you have a…
view full answer...We don't have a combo of the Curt Hitch Ball #C40008 and Curt Ball Mount #C45340. The ball mount is extremely heavy-duty, rated up to 17,000 pounds. I think it's safe to assume you don't have a torque wrench rated up to 450 foot pounds…
view full answer...There are a couple options for extended ball mounts that fit 2 inch hitches and have extra length for clearance. You didn't mention the rise or drop you need so I'll give you a couple choices so you can find the right one: - 1" Rise,…
view full answer...Functionally speaking, there isn't a huge difference. The Curt #C56382 has a slightly lower capacity at 3 amps for circuit for stop/turn signals and 6 amps for taillights. The Tekonsha #118781 has a capacity of 5 amps per stop/turn circuit and…
view full answer...I hope that I am understanding what you are needing correctly. We do have the Replacement Power Cord with Power Supply Box for Thomas Payne Seismic RV Power Reclining Sofas #195-000111 which is the 2-pin power cord that powers the Thomas Payne…
view full answer...You would not want to plug your Thomas Payne recliner directly into your control panel. The recliner is not fused so if there was a power surge you could fry the wiring running to the couch and all of the electrical components like the powered…
view full answer...