Replacement Electric Brakes for 10" Drum Assembly
Published 06/05/2018
Products Featured in This Question
Question:
I have a duel axel trailer with10inch hub pressed onto my axel and electric breakes do you have replacement breaks for them?
asked by: Art H
Expert Reply:
In order to get the correct 10" brake assembly you will need to know your axle's weight capacity and your brake mounting flange bolt pattern.
It is likely with that size drum your axle is rated for 3,500 lbs and and you have a 4-bolt mounting flange though you will need to confirm this. If that is what you have a great option would be the Electric Trailer Brake Kit # AKEBRK-35-SA, which is rated for 3,500 lb axles, measures 10" diameter x 2-1/4" wide and are self-adjusting. To install them you will only need Mounting Hardware for 10" Brake Assemblies # BRKH10B.
Should you have a different axle capacity mounting flange let me know and I'd be happy to find you the correct brake assembly.
Product Page this Question was Asked From
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Continue Researching
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Hubs for BD-545-17 Drum Brakes and Braking Assemblies
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Adjuster Plugs for 7", 10", and 12" Brake Assemblies - Qty 4
- Shop: Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Search Results: hub assembly
- Search Results: trailer brakes
- Search Results: rubber grommet
- Q&A: How to Adjust Dexter Nev-R-Adjust Electric Trailer Brake Assembly
- Q&A: Dexter Never Adjust Brakes Initial Adjustment on Tandem Axle Trialer
- Q&A: Recommended Replacement Hubs, Bearings and Brakes for Used Flatbed Trailer
- Q&A: Troubleshooting New Self Adjusting Trailer Brakes that Are Performing Weakly
- Q&A: Are Dexter Nev-R Adjust Brake Assemblies Adjusted Upon the Initial Installation
- Q&A: Is Drilling Required For Installation Of Roadmaster Front Anti-Sway Bar on 2026 Jayco Melbourne 24L
- Article: Spring Towing Readiness Checklist
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Accurately Measure Trailer Leaf Springs