Customers compare ETBRK335DC to these similar products
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Hi Ed, In regards to the 3,500 lb Demco Hydraulic Brake Kit #40716-15 and the Hydraulic Trailer Brake Kit #AKUBRK-35-D, starting with the country of origin, the Demco are made in the U.S. and the opposing brakes (made by AxleTek) are made in China.…
view full answer...The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…
view full answer...You are correct. We sell the assemblies as a pair as part #AKFBBRK-35-D or individually as part #AKFBBRK-35R-D and #AKFBBRK-35L-D.
view full answer...We do have what you need to replace the UFP HD-1377-10 hub and drum as well as add hydraulic brakes for your boat trailer. Here are the exact parts you will need: - Dexter Trailer Hub and Drum Assembly #84546UC3 - Hydraulic Trailer Brake Kit -…
view full answer...To determine which hydraulic drum brake assemblies will fit on your 2,500 pound axles you'll need to measure the dimensions of your drums. For example, if your drums are 10 by 2-1/4 inches you can use #AKFBBRK-35-D. Since you have a boat trailer…
view full answer...Yes. The Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet - 10" - Left/Right Hand Assemblies - 3.5K #AKUBRK-35-D are compatible with the Dexter Trailer Hub and Drum for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized #8-247-50.…
view full answer...To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…
view full answer...Since you need 10 inch by 2-1/4 inch hydraulic brake assemblies that have a 4 bolt pattern that is 2-7/8 inches the drum brake kit part #AKUBRK-35-D would be what you'd need. The bolt pattern you mentioned is the standard 4 bolt pattern.
view full answer...From my research, the correct replacement for the UFP HD1377 hub/drum is the Trailer Hub and Drum Assembly part #AKHD-545-35-K or the Dexter 5 on 4-1/2 Complete Hub-and-Drum Assembly part #84546UC3. These hub/drums both use a L68149 (1.378"…
view full answer...Based on previous information we have for your UFP HD-1377-10 hub it uses the following components. I do recommend pulling one of your hubs to verify that the replacements listed below match your current parts. Inner Bearing #L68149 (Inner diameter…
view full answer...The seals that you would need to replace your AL-KO 1536852 seals are the TruRyde Grease / Oil Seals 10-10 (Pair) - Double Lip Seals #RG06-090. They have an inner diameter of 2.125", an outer diameter of 3.376", and are used for 5,200 lb -…
view full answer...The Grease Seal #168233 is the correct seal to replace the AD2527. Your seal is an older design that wasn't the greatest hence the reason you don't see it around anymore. The new seal is a double lip seal that make it right for your boat…
view full answer...