Difference Between Hub and Spigot for Valterra Double Waste Valves

Question

Question:

Is this correct? Isnt the T80 a 3inch Hub female and a 1-1/2inch Hub female Part # T80 has a 3inch Hub female and a 1-1/2inch Hub male Part # T80C has a 3inch Hub female and a 1-1/2inch Spigot male Part # T80A has a 3inch Spigot male and a 1-1/2inch Hub female

asked by: Jim D

0

Expert Reply:

Yes, the info you listed is correct for the Valterra double waste valves.

Part # T80 has a 3" Hub (female) and a 1-1/2" Hub (male)
Part # T80C has a 3" Hub (female) and a 1-1/2" Spigot (male)
Part # T80A has a 3" Spigot (male) and a 1-1/2" Hub (female)

Spigots fit into hubs.

expert reply by: Jameson C

0

Answer 1

The differences between the Valterra #T80, #T80C, and #T80A simply has to do with the types of connections that they have. They vary between Hub (female) and Spigot (male) ends to suit your needs. The ends that change are on the side. The top of each…

view full answer...

Answer 2

A spacer or hub-centric ring is sometimes used on passenger vehicles, but our resident wheel and tire guru tells me that they aren't needed for use on trailers, due to the weight load a trailer wheel will be under. If you feel you need them, you…

view full answer...

Answer 3

The correct elbow to add the Double RV Waste Valves Item #T80 to your 2018 Jayco 232RB Travel Trailer is Item #D50-2882. I have also include a link to the page for the 1-1/2" elbows incase you needed one for the grey water side.

view full answer...

Answer 4

Plumbing parts are interchangeable on RV's just as long as the fittings are the correct size. I couldn't find that exact part number but I believe I have found the Valterra equivalent. If the Bristol valve you are talking about uses the…

view full answer...

Answer 5

The drain itself on the Double RV Waste Valves #T81 can not rotate, however the valve can rotate. You can check out the product overview video showing #T80 rotating as #T81 would rotate.

view full answer...

Answer 6

You should be able to tell which Valterra Double RV Waste Valves you need by inspecting your current connection points. The one end with the lugs on it is the same on all 3 parts so you simply need to determine if you need hubs, spigots, or a…

view full answer...

Answer 7

Yes, you can undo the bolts on both sides of the closed valves of the Double RV Waste Valves #T80 and rotate it to face more down towards the hole. I am not sure how closely aligned that would make it because you'd have to rotate it to the next…

view full answer...

Answer 8

Thanks for the picture of your valves! Based on that the Valterra Double RV Waste Valves #T80 is the correct part you need. This has 3 inch and 1-1/2 inch hubs that fit over the pipes on your camper like what you need.

view full answer...

Answer 9

Product #34466ND13AAR is a hub, a hub or a socket is the common female connection to PVC fittings. While #34466ND13BAR is a spigot, which is the end connection to a fitting that has to be assembled into another fitting; the spigot fitting has the…

view full answer...

Answer 10

Yes, the Double RV Waste Valves part #T80 is exactly what you need to replace the Bristol RV Waste Valves V93B15 that you have now. If you want to reuse your existing spigot flange then they will match up to those on the above as the four bolt flange…

view full answer...

Answer 11

Thanks for the picture. From that I can point you towards the correct valve setup to replace what's in it as part #T80A. But for the rest of the piping we won't be able to help you as we do not carry it. There are a few different variations…

view full answer...

Answer 12

Hello Charles. The best ladder we have for your Allegro Red 33AA is the Stromberg Carlson Exterior RV Ladder - Aluminum - 99-1/2" Tall - 250 lbs - Black #LA-401BA. You should also grab some butyl tape #AL68FJ and some silicone #FAS59FR to seal…

view full answer...

Difference Between Hub and Spigot for Valterra Double Waste Valves

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching