See what our Experts say about this Valterra RV Waste Valves

• Kit to Charge Battery of 2015 Chevy Equinox When Flat Towing
  Yes, we have the Roadmaster charge wire kit part # RM-156-25 which gives you the needed wiring and breaker to run a power wire from the tow vehicle to the battery of your 2015 Chevy Equinox. I attached an install video for this kit on a similar 2016 Equinox as well.
  view full answer...
• Replacement Gray Water Tank Reducer Adapter from 3 Inch to 1-1/2 Inch
  It sounds like you are looking for the Valterra Eccentric Tank Reducer part # T1041-1 which installs in an RV gray water tank with with 3" diameter opening and then reduces this down to 1-1/2". The adapter will install inside the neck on the tank and then secured with gasket maker part # LT37467 and a band clamp part # H03-0009. In order to replace the waste valves you can then use the Double RV Waste Valves part # T80A depending on your setup. Please note, you'll also need the Valterra...
  view full answer...
• What is the Difference Between Valterra Double RV Waste Valves # T80, # T80C, and # T80A
  The differences between the Valterra # T80, # T80C, and # T80A simply has to do with the types of connections that they have. They vary between Hub (female) and Spigot (male) ends to suit your needs. The ends that change are on the side. The top of each part number has a bayonet cap that fits over a 3" lug fitting for your sewer hose. Part # T80 has a 3" Hub (female) and a 1-1/2" Hub (male) Part # T80C has a 3" Hub (female) and a 1-1/2" Spigot (male) Part # T80A has a 3" Spigot (male)...
  view full answer...
  
• Replacement Double RV Waste Valves Recommendation for RV
  Thanks for the picture. From that I can point you towards the correct valve setup to replace what's in it as part # T80A. But for the rest of the piping we won't be able to help you as we do not carry it. There are a few different variations of the valve though. Part # T80 has a 3" Hub (female) and a 1-1/2" Hub (male) Part # T80C has a 3" Hub (female) and a 1-1/2" Spigot (male) Part # T80A has a 3" Spigot (male) and a 1-1/2" Hub (female)
  view full answer...
  
• What are the Differences between Valterra Hub and Spigot Waste Valve Adapters T80, T80C, and T80A
  The differences between the Valterra # T80, # T80C, and # T80A simply has to do with the types of connections that they have. They vary between Hub (female) and Spigot (male) ends to suit your needs. The ends that change are on the side. The top of each part number has a bayonet cap that fits over a 3" lug fitting for your sewer hose. Part # T80 has a 3" Hub (female) and a 1-1/2" Hub (male) Part # T80C has a 3" Hub (female) and a 1-1/2" Spigot (male) Part # T80A has a 3" Spigot (male)...
  view full answer...
  
• Difference Between Hub and Spigot for Valterra Double Waste Valves
  Yes, the info you listed is correct for the Valterra double waste valves. Part # T80 has a 3" Hub (female) and a 1-1/2" Hub (male) Part # T80C has a 3" Hub (female) and a 1-1/2" Spigot (male) Part # T80A has a 3" Spigot (male) and a 1-1/2" Hub (female) Spigots fit into hubs.
  view full answer...
• Valterra Double RV Waste Valves Part # T80A Length From Spigot To Hub
  The Double RV Waste Valves - Elbow - Rotating - 3" Spigot and 1.5" Hub to 3" Lug # T80A is 10-1/2" in length from the 3" spigot to the 1-1/2" hub.
  view full answer...
  
• Replacement Double RV Waste Valve For a 2015 Nucamp 320s Camper
  Unfortunately Chris, I have no way to see which parts are installed on your 2015 Nucamp 320s. These double RV waste valves only have a few different designs so you will want to try and match yours with one from the list below. # T38 # T18A # TR38A # T80 # 34466NDHR19AAA # TR38B # 34466ND14AAR # T18C # T80A
  view full answer...
• Replacement RV Waste Valves for 2017 Thor Four Winds
  I do not have ability to pull a build sheet from the OEM to know what they installed at the factory. However, the Valterra Double RV Waste Valves, # T80A are known to fit similar Model RV's from Thor. Please compare this to current. If you are still unsure if this is a workable solution, please feel free to forward an image of current valve and any part numbers that you can identify.
  view full answer...
• Is Spacer Needed to Fit Double RV Waste Valves # T80A to 3-1/2" Inside Diameter Outlet
  You actually don't need a spacer to attach the Double RV Waste Valves # T80A to your current black water tank. Since you are measuring 3-1/2" for your outlet you have a hub. The 3" spigot end on this double waste valve has an outer diameter of 3-1/2" so it will fit perfectly in the hub of your current setup. In regards to the 3" measurement, that is actually the inner diameter of the pipe itself. If you measure past the hub fitting on your line you should see that it measures 3".
  view full answer...
  
• Sealant Recommendation for Installing Valterra ABS Solvent Cement part # A05-0303
  Are you using a sealant like the Valterra ABS Solvent Cement part # A05-0303 when installing the Valterra Motorhome Waste Valve # T80A.
  view full answer...

Do you have a question about this RV Waste Valve?