Double RV Waste Valves - Elbow - Rotating - 3" Hub and 1-1/2" Spigot to 3" Lug

Part Number: T80C

379 Reviews | 7 Questions

In Stock

$65.62

Retail:$70.06

You Save: 6%

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

valterra rv waste valve sewer elbow 3 inch hub

valterra rv waste valve manual 3 inch hub t80c

valterra rv waste valve double 3 inch hub t80c

valterra rv waste valve double manual t80c

valterra rv waste valve sewer elbow 3 inch hub double valves - rotating and 1-1/2 spigot to lug

valterra rv waste valve sewer elbow double

Show All (8) Product Images

Show Fewer Product Images

Customer Photos

Double RV Waste Valves - Elbow - Rotating - 3" Hub and 1-1/2" Spigot to 3" Lug customer photo

Show All (1) Customer Images

Show Fewer Customer Images

Videos

Feature Review Double RV Waste Valves

Show All (1) Videos

Show Fewer Videos

Need help with installation?

Locate installers near me

RV sewer elbow combines rotating black-water and gray-water waste valves. 3" Hub slides over black-water line. 1-1/2" Spigot slides into gray-water line. Bayonet cap fits over the 3" lug fitting that connects to your sewer hose. Great Prices for the best rv waste valve from Valterra. Double RV Waste Valves - Elbow - Rotating - 3" Hub and 1-1/2" Spigot to 3" Lug part number T80C can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (379)
Q & A (0)
Related Parts
Photos

Valterra RV Waste Valve - T80C

Features:

RV sewer elbow combines a 1-1/2" waste valve and a 3" waste valve
- Can be used as a replacement part or upgrade your existing setup
Elbow merges the flow of waste from your black-water tank and gray-water tank
Rotating valves offer easy access at mounting location
- Position valves at desired angle during installation
3" Hub slides over your RV's black-water line
1-1/2" Spigot slides into your gray-water line
Bayonet-style cap covers lug fitting when not in use
- Integrated strap keeps cap connected to valves
Durable black ABS plastic construction
ABS solvent cement (sold separately) required for installation
Gray and black handles for easy identification of valves

This RV sewer elbow with rotating valves is a part of your motor home's waste management system. The elbow combines the flow of wastewater from your gray-water tank and your black-water tank. And the valves can be rotated as desired during setup to make it easier to reach. Connect your sewer hose to the 3" lug fitting on the elbow and open the valves to drain your holding tanks.

T80C Valterra Motorhome Sewer Elbow w/ Double Rotating Valves - 3" Hub x 1-1/2" Spigot x 3" Bayonet Cap

Customer Satisfaction Score:

98% were satisfied with this product

2% of customers were not satisfied

Wrong item was ordered
Package not accepted

2% of customers were not satisfied

Wrong item was ordered
Package not accepted

4.8

379 reviews

5 Stars		(341)
4 Stars		(25)
3 Stars		(6)
2 Stars		(4)
1 Star		(3)

by: Charles 04/28/2024

The grey water part of this is too short to fit our 2017 Jayco Jayflight SLX. We need the part with a longer grey connection.

Click to Enlarge

by: Daniel 09/02/2018

reasonable price great product and good shipping time Thank you.

by: Jeff 06/25/2021

Quality product, updated throughout shipping with helpful tools

by: Debbie 09/19/2021 One Year Later

great replacement

by: Gary M 12/04/2019 One Year Later

Still working great after a year. It replaced the leaking valve on our 2001 Monaco. I would recommend this product from etrailer.

by: Tony 02/04/2022 One Year Later

Worked Great , Solved My Problems !!

by: Brian 12/11/2024

It preformed as it should.

by: Wayne 08/13/2026 One Year Later

by: Adrian 10/20/2026

by: Bill 01/08/2022

Don't know yet have not put it on

by: Mark 04/23/2026

by: Dan 08/17/2021

by: Joey 09/16/2021

by: Keith 03/23/2021

by: Anthony J. 03/14/2025

by: Steven 12/01/2021

by: Gary 09/25/2021

by: David 08/05/2022

by: Richard 11/23/2023

by: Jake O 08/13/2026

Installation was a breeze. I purchased a 2ft section of 3" & 1-1/2" ABS pipe, two 1-1/2" right angle, one 1-1/2"coupler and one 3" coupler, cleaner (MEK/Acetone) and ABS cement. I cut all pieces first fitted them all first before gluing. Prepared all sections with cleaner first before applying ABS cement. Pictures show the "before" with duct tape in leaking sections.

Click to Enlarge

Christopher H.

8/14/2026

The installation looks clean Jake! Really appreciate the before and after photos as well. Feeback like this really helps the next person looking to tackle this themselves.

by: Pat 09/05/2026

I have a 2025 Winnebago View 24D with cable actuated dump valves, which either don't close and leak or are just very difficult to use..So I replumbed it to like the 2012 24J Winnebago View we traded in on the 2025. New valves are easier to operate and close tightly, looking forward to years of no problems now..been rving for 52 years never had these problems with any other rvs we have owned..Thanks for the parts

Click to Enlarge

by: AH 04/23/2026

Works great. I made a plan and upgraded my RV waste plumbing to be 3" for both the black and grey tanks. Additionally I used flexible rubber fittings for some of the longer pieces instead of gluing it all together. This will be more serviceable in the future if any of the sections of pipe were to fail. I had to replace this valve because the grey tank pipe split along the pipe seam for the second time. Overall, this valve was exactly what I expected and fit with my plumbing plan perfectly.

Click to Enlarge

Heather A.

4/24/2026

That sounds like a really solid upgrade. Moving both your black and gray tanks to 3" plumbing and using flexible rubber fittings is a smart call especially for future serviceability. It’s great to hear the valve fit right into your setup and worked exactly as expected. Hopefully that helps prevent any more issues with those pipe seams going forward. Thanks for sharing your experience! What kind of RV do you have?

by: Jose 09/23/2026

part arrived on time and worked as designed, it was kind of a challenge to get it installed but the fit was perfect

Click to Enlarge

Jerred H.

9/23/2026

Thanks for the picture Jose. The new valve looks great. Those sure are difficult to install so glad you were able to get it all set up and it fit so well.

by: Jerry 09/24/2026

I just gave it an average because I should have ordered a gate vale with just a 1 1/2 in. outlet positioned another way. The 1 1/2 on this one was facing outward causing the whole valve system to be too long and set the tank too far back under the trailer. I used it, however I cut the 1 1/2 value outlet off and plugged the hole and I will feed my shower drain and sink drain into the 2 in. outlet and close it off when needed with the extra gate I ordered for the 2 in. outlet..

by: Donald 05/31/2026

The double waste valve assembly looked pretty well-made. However, I had to return it as the ends didn't match my motorhome. I chatted with Audrey through email and she was very helpful.
I tried to contact e-Trailer shortly after I ordered it, to cancel. Their customer Service process is crap. It took 3 business days for them to respond. By then the order had shipped. Bottom line, I had to pay the return shipping. I'll just go back to [online vendor]. Free returns.

379

true

Show More Reviews

See what our Experts say about this Valterra RV Waste Valve

Do you have a question about this RV Waste Valve?

Kit to Charge Battery of 2015 Chevy Equinox When Flat Towing
Yes, we have the Roadmaster charge wire kit part # RM-156-25 which gives you the needed wiring and breaker to run a power wire from the tow vehicle to the battery of your 2015 Chevy Equinox. I attached an install video for this kit on a similar 2016 Equinox as well.
view full answer...
What is the Difference Between Valterra Double RV Waste Valves # T80, # T80C, and # T80A
The differences between the Valterra # T80, # T80C, and # T80A simply has to do with the types of connections that they have. They vary between Hub (female) and Spigot (male) ends to suit your needs. The ends that change are on the side. The top of each part number has a bayonet cap that fits over a 3" lug fitting for your sewer hose. Part # T80 has a 3" Hub (female) and a 1-1/2" Hub (male) Part # T80C has a 3" Hub (female) and a 1-1/2" Spigot (male) Part # T80A has a 3" Spigot (male)...
view full answer...
What are the Differences between Valterra Hub and Spigot Waste Valve Adapters T80, T80C, and T80A
The differences between the Valterra # T80, # T80C, and # T80A simply has to do with the types of connections that they have. They vary between Hub (female) and Spigot (male) ends to suit your needs. The ends that change are on the side. The top of each part number has a bayonet cap that fits over a 3" lug fitting for your sewer hose. Part # T80 has a 3" Hub (female) and a 1-1/2" Hub (male) Part # T80C has a 3" Hub (female) and a 1-1/2" Spigot (male) Part # T80A has a 3" Spigot (male)...
view full answer...
Replacement Double RV Waste Valves Recommendation for RV
Thanks for the picture. From that I can point you towards the correct valve setup to replace what's in it as part # T80A. But for the rest of the piping we won't be able to help you as we do not carry it. There are a few different variations of the valve though. Part # T80 has a 3" Hub (female) and a 1-1/2" Hub (male) Part # T80C has a 3" Hub (female) and a 1-1/2" Spigot (male) Part # T80A has a 3" Spigot (male) and a 1-1/2" Hub (female)
view full answer...
Difference Between Hub and Spigot for Valterra Double Waste Valves
Yes, the info you listed is correct for the Valterra double waste valves. Part # T80 has a 3" Hub (female) and a 1-1/2" Hub (male) Part # T80C has a 3" Hub (female) and a 1-1/2" Spigot (male) Part # T80A has a 3" Spigot (male) and a 1-1/2" Hub (female) Spigots fit into hubs.
view full answer...
Comparing the Double RV Waste Valves Part T80C and Part T80
The difference between the Double RV Waste Valves part # T80C and part # T80 is that the former has a 1-1/2" spigot fitting and the latter has a 1-1/2" hub fitting. They both have 3" hub fittings as well. The spigot fitting means this will slide into the pipe and the hub fitting means this will slide over the pipe. The hub fittings are more common for the valves. In order to attach either assembly you will also need the Valterra ABS Solvent Cement part # A05-0303.
view full answer...
Difference Between Valterra Double Rotating Waste Valve T80 and T80C
The difference is that the part # T80C has a spigot on the 1-1/2 inch side and the # T80 has a hub instead. A hub needs to mate to a spigot and a spigot mates to a hub. So you application determines which you would need.
view full answer...

Do you have a question about this RV Waste Valve?

Info for this part was:

Expert Research:

Jameson C

Installed by:

Cole B

Written by:

Amy B

Updated by:

Wilson B

Updated by:

Cody B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.