Dimensions Of Valterra Double Rotating Waste Valve # T80

Updated 08/21/2025 | Published 03/15/2017

Question:

I would like to have some dimention on one of your product. The Valterra Double Rotating Waste Valve - 3inch Hub x 1-1/2inch Hub x 3inch Bayonet Cap Item # T80 The dimensions I am looking for are the distance between the 2 inlets 3 and 1 1/2 overall dimension and the distance between the two square face plate, i.e. the base of these inlet. Thank you.

asked by: Jonathan

Expert Reply:

I went to our warehouse and took some measurements of the Valterra Double Rotating Waste Valve, part # T80 for you.

I have attached a photo of the valve that has the dimensions you asked about. The distance from the end of the 1-1/2 inch inlet pipe to the end of the 3-inch inlet pipe is 10-7/8 inches. The distance from the outside to outside of the square face plates is 8-1/2 inches and inside to inside between the plates is 5-3/4 inches.

expert reply by: Jeffrey L