How to Know if Rear View Safety Universal Mirror Monitor # RVS-619N is Correct Replacement Monitor

Question

Question:

need to replace just the monitor in our RV. RVS-619N looks almost exactly like the one we have. can not find any info on our monitor. not sure if plug will work on existing unit. can I see a pic of RVS-619N connection plug?

asked by: Gary

0

Expert Reply:

I attached a picture of the connector that comes with the Rear View Safety Universal Mirror Monitor # RVS-619N for you to check out. You should be able to compare that to what you have to see if this is the same thing. The display and overall look of the # RVS-619N is pretty unique. If what you have looks like it and the connector matches this is what you'd have/need.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Yes; what you're describing does sound like the issue most likely stems from the multiplexer potentially shorting out. It looks like you've got a Rear View Safety system and will need the Rear View Safety Multiplexer Box - 3 Channel #RVS-501N…

view full answer...

Answer 2

Hello Nancy, thanks for reaching out. It certainly could be the multiplexer. Basically, if there is power going into the multiplexer but not coming out then yes it would be damaged and in need of replacement. You can easily test this with a…

view full answer...

Answer 3

The Rear View Safety Switcher Box #RVS-501N-3 is not capable of 720p HD as it uses RCA cables which limit you to 480p as a highest quality.

view full answer...

Answer 4

The Rear View Safety Switcher part #RVS-501N is for connecting to any standard cameras that use RCA connections whereas the part #RVS-501N-3 is for connecting to RVS brand cameras.

view full answer...

Answer 5

The Rear View Safety Multiplexer Box #RVS-501N has 6 pins on the power in plug but nowhere else. The camera plugs are all 5 pin. The monitor cable only works if you have a Rear View Safety monitor. If you have a different system you need #RVS-501N-3…

view full answer...

Answer 6

Hey David! Yes, to replace that 6-Pin Plug that comes with the Rear View Safety Switcher Box #RVS-501N-3 you need part #RVS-PWR8.

view full answer...

Answer 7

The Rear View Safety Switcher Box #RVS-501N-3 can be used to switch between three cameras and even has an input designated for a reverse camera like you already have. It selects the camera to view based on the trigger wires that you run to the wiring…

view full answer...

Answer 8

You can use the #RVS-501N as long as the rest of your system is a Rear View Safety system. The #RVS-501N-3 is required if you don't have an RVS system.

view full answer...

Answer 9

I'll be happy to help you with your questions but first, the part #RVS-910 you asked about will only fit a 2003-2016 Chevy Express. Since you have a 2019 you need the part #RVS-913 instead. This does come with 10 meters of cable and while we…

view full answer...

Answer 10

You can add up to 3 cameras to the 7" Rear View Safety Backup Monitor #RVS-6137N if you use the Rear View Safety Multiplexer Box #RVS-501N. The Rear View Safety Backup Camera #RVS-771 comes with all of the wiring and mounting brackets that you…

view full answer...

Answer 11

The coin tray on the dash of your 2017 Ford E-450 can be simply pried out with a slot screwdriver. You can gently insert the screwdriver between the tray and the dash piece that surrounds it. You will then pry the tray out. Just be sure to apply…

view full answer...

Answer 12

For side cameras that can be used with the RVS monitor part #RVS-619N you'd want the part #RVS-775L for the driver's side and part #RVS-775R for the right hand side.

view full answer...

How to Know if Rear View Safety Universal Mirror Monitor # RVS-619N is Correct Replacement Monitor

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching