Can Second Camera be Added to the 7 Rear View Safety Backup Monitor

Question

Question:

Can you add a second camera to the system for a forward facing camera

asked by: Allan H

0

Expert Reply:

You can add up to 3 cameras to the 7" Rear View Safety Backup Monitor # RVS-6137N if you use the Rear View Safety Multiplexer Box # RVS-501N.

The Rear View Safety Backup Camera # RVS-771 comes with all of the wiring and mounting brackets that you need to connect an additional camera to this monitor.

expert reply by: Jon G

0

Answer 1

When the view is stuck what is the lighting functions of the setup doing? Are any of the turn signals or brake lights sticking on at the same time or are they functioning fine? If the light functions are staying on you have a lighting short that is…

view full answer...

Answer 2

I attached a picture of the connector that comes with the Rear View Safety Universal Mirror Monitor #RVS-619N for you to check out. You should be able to compare that to what you have to see if this is the same thing. The display and overall look of…

view full answer...

Answer 3

I'll be happy to help you with your questions but first, the part #RVS-910 you asked about will only fit a 2003-2016 Chevy Express. Since you have a 2019 you need the part #RVS-913 instead. This does come with 10 meters of cable and while we…

view full answer...

Answer 4

Hey Ted, thanks for the information! To replace your Ventline as-13 m-va 204 cover, you'll want the Replacement Plastic Dome Assembly for Ventline Vanair Trailer Roof Vent item #BVA0502-03. This cover measures 8-1/2" wide with the 2 screw…

view full answer...

Answer 5

I believe I have exactly what you need to add the desired backup camera(s) to your Ford F-150. For starters, you will need a monitor and for that I recommend the Rear View Safety Backup Monitor part #RVS-6139N. The monitor does come with a universal…

view full answer...

Answer 6

The switch would not effect the speed of the fan. It sounds like your motor is either getting inconsistent power or the motor itself is failing. You can test the current using a multimeter like #PT89ZR. A bad ground may be at fault or you may need to…

view full answer...

Answer 7

The Rear View Safety Flush Mount for 7" Monitor part #RVS-421 is designed for the Rear View Safety Backup Monitor part RVS-6137N which measures 7" long x 5-1/4" tall x 1" deep. Unfortunately, we cannot confirm fit of the mount on…

view full answer...

Answer 8

In order to use the Rear View Safety Backup Camera part #RVS-770 you would need to obtain the following: Rear View Safety Backup Monitor part #RVS-6137N Rear View Safety Multiplexer Box part #RVS-501N Rear View Safety Trailer Tow Quick Connect Kit…

view full answer...

Answer 9

I believe the part you're referring to on our site is the Replacement Plastic Dome Assembly for Ventline Vanair Trailer Roof Vent #BVA0502-03. I'm not finding a Ventline VC-467 model vent but this still may fit. The vent lid measures…

view full answer...

Answer 10

Although we may not have an installation video for your exact vehicle, you can follow the attached installation video for when we installed the Rear View Safety Backup Camera System #RVS-770613-NM on a 2011 Ford Van. The installation process…

view full answer...

Answer 11

An AS-13M is an older Ventline model so I recommend just replacing it with a MaxxFan Mini Plus Manual RV Roof Vent #MA00-03851. This powered vent features a rain shield that will allow you to use your vent in any weather or even while driving. The…

view full answer...

Answer 12

I wasn't able to find much information on the exact replacement for your Ventline AS-13 M-VA 203 roof vent. The only information I found said it had an overall width of 8-1/2" and uses a 6" fan. It sounds like you will need the…

view full answer...

Can Second Camera be Added to the 7 Rear View Safety Backup Monitor

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching