Can Rear View Safety Switcher Box be Used to Add Additional Camera to Sony XAV-AX1000  

The Rear View Safety Switcher part #RVS-501N is for connecting to any standard cameras that use RCA connections whereas the part #RVS-501N-3 is for connecting to RVS brand cameras.

Thank you very much for your purchase from etrailer of the Rear View Safety Switcher Box #RVS-501N. I reached out to the manufacturer who said to me that the issue is that you're not receiving enough voltage, and that you will need to utilize…

The Rear View Safety Multiplexer Box - 3 Channel #RVS-501N that you referenced has a single output and trigger for the video like you need and three inputs for cameras and a trigger for each to know which to switch to. I attached a diagram that shows…

I have attached an image of the 5-Pin connector pinout with the RCA being yellow for video, and white for audio on the Rear View Safety Adapter Cord #RVS-RCA5-AM.

What I recommend is to start by replacing the camera with something such as #VCMS17B. Basically one component at a time. So you could hardwire in a new camera to the wiring that is already installed. If the problem continues then you could move on to…

It looks like the Jensen VR209TP you've got is a standard double-din stereo, so the best available replacement we have is the Jensen RV Stereo - Double DIN - HDMI, AUX/USB, Bluetooth - 48W - 2 Zone - 12V #JWM45. This system allows for Bluetooth…

I apologize for any confusion but the Rear View Safety Adapter Cord - 5 Pin Female to RCA Female #RVS-RCA5 has a 5 pin female connection like what you see in the attached picture. The opposite connector to this is 5 pin male to RCA male part…

It does sound like you need the Rear View Safety Adapter cord part #RVS-RCA5-AM. This has the 5 pin RVS style connector on one end and RCA cables on the other. The red RCA is a little different though so check out the picture I attached to verify.

The Rear View Safety Adapter Cord #RVS-RCA5-AM does not work in conjunction with the Trailer Tow Quick Connect Kit #RVS-213-613 you referenced. Instead, it connects a Rear View Safety camera directly to any monitor with an RCA input. To power it,…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…