Correct Size Bearing Buddy Bra

Question

Question:

I purchased a set of replacement bras, #19B, and they are too large for my Bearing Buddies. I cant seem to find a chart or list of sizes. Can you please help? Thanks in advance!

asked by: Rich

0

Expert Reply:

The Bearing Buddy Bra # BB19B you purchased has an outer diameter of 2-1/8" and fits models 1980, 1980SS, 1980A, 1980A-SS, 1938, 1938SS, 1968, 1968SS, 2047, 2047SS, 2080 and 2080SS.

The only other Bearing Buddy Bra we carry that is smaller is # BB17B, which has an outer diameter of 2" and fits models 1781, 1781SS, 1810 and 1810SS, so if you have one of those models this part would work for you. I've added a link to a video review of this part for you to check out as well.

expert reply by: Kyle S

0

Answer 1

You can measure either the outer diameter of the part of the dust cap that fits into the hub OR the inner diameter of the hub where the dust cap goes using calipers such as #PTW80157. Calipers are needed because the measurement has to be as accurate…

view full answer...

Answer 2

We can get you what you need unfortunately you will need to take some of the measurements to make sure you get the correct bearings and seals for your trailer. Trailer manufacturers use many different sizes when they build their systems and without…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Allie. The shank measures 2-1/2" wide on the Curt Weight Distribution Shank item #C17132. It's designed to fit 2-1/2" x 2-1/2" trailer hitches. The vertical part is 2" wide and works with most weight distribution systems.…

view full answer...

Answer 5

Hi Om, Congrats on the new truck! What is your favorite new feature? We always aim to carry the best brands, and while Curt is definitely a solid choice, B&W is the cream of the crop! Their products are not only top-tier in quality, but they’re…

view full answer...

Answer 6

Yes, we had a customer who was able to replace his Dexter 8-155 hubs with the #8-201-5UC3-EZ that you referenced so they should work well for you. You can verify that this hub will work for you by pulling your current hub and making sure they have…

view full answer...

Answer 7

Hello Xiaoming, Yes, we do have the Dexter K71-622-00 available, though it's under a different part number for our site. What you need is the following: - Dexter Replacement Trailer Axle Spindle Retainer Kit #DX82CR This includes two D washers,…

view full answer...

Answer 8

Thanks for the photo. Your master cylinder looks like the Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum #T4395100 or if you have disc brakes #T4820000. I've linked the page to all your replacement…

view full answer...

Answer 9

The plastic caps for the Bearing Buddy bearing protectors that you are looking for are the Bearing Buddy Bras. We carry three different bras, #BB17B, #BB19B and #BB23B that fit different ranges of Bearing Buddy sizes. You should choose the Bearing…

view full answer...

Answer 10

If the outer diameter of your Bearing Buddy measures 2.125" then you need the Model 19B Replacement Bearing Buddy Bras #BB19B. These are compatible with models that have an outer diameter of 2-1/8" (or 2.125" in decimal form). Attached…

view full answer...

Correct Size Bearing Buddy Bra

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching