Recommendation For SumoSprings That Work With 2010 Workhorse W20 Or W22 Chassis

Question

Question:

I have a 2011 Thor Serrano class A with the workhorse chassis gvwr 20500# w-20 or w-22. I may Carrie a motorcycle on the back so another 600# of weight. Which sumo springs are best for my RV. How tall are springs. If they fit my RV can I order them online or give you a call. Please give item# if possible. Thanks for your time.

asked by: Bert

0

Expert Reply:

Based on your information, I recommend the 5 inch tall SumoSprings Solo Custom Helper Springs, Item # SSF-280-47, for your front axle and they work with W20 or W22 variations of your 2010 Workhorse chassis. For rear axle support, I recommend the 8-1/2 inch tall SumoSprings Maxim Custom Helper Springs, Item # SSR-280-54-1.

expert reply by: Brint H

0

Answer 1

Hey Micah! Pacbrake has actually been around for a long time, more than 60 years. We have had customers ask for these air bags in the past, and we've seen them on vehicles coming in. Until now, Firestone has been the go to since their quality is…

view full answer...

Answer 2

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 3

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 4

There is no exact way to determine the leaf spring length. The best way to determine the length for a replacement is by measuring the existing leaf springs. The hanger distance and shackle length can help you get a good idea, but you're looking…

view full answer...

Answer 5

Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is the…

view full answer...

Answer 6

The determine the correct replacement leaf spring on your 2021 Coachmen 259FKDS you'll need to lift your trailer frame so the spring is hanging freely and then measure from center-eye to center-eye, then for the equalizer you need to measure…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Douglas! The best option for an upgrade is the MORryde Suspension Upgrade Kit for Tandem Axle Trailers. This comes with wet bolts, bronze bushings, and heavy duty shackle straps. Do you know the length of your current shackles? If they're…

view full answer...

Answer 9

To slightly lower your trailer that has had an "axle flip" kit installed you would want to use slightly shorter shackle straps, not longer ones. Shorter shackles will let the axle rest closer to the trailer frame, which lowers the trailer…

view full answer...

Answer 10

Hey JT! Sorry to hear about your trouble with the leaf springs. Hopefully there wasn't a lot of damage and everyone stayed safe. From what I have found the 26E-3500 is the same as the Dexter 072-027-00. This is the 6-Leaf Double-Eye Spring for…

view full answer...

Answer 11

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 12

Thanks for the pictures! Based on the weight of your 2008 Keystone Cougar 5th Wheel, you will want the item #LG-1 landing gear set. You are going to want to measure to be sure this is the right size for you. The two things you will want to measure…

view full answer...

Recommendation For SumoSprings That Work With 2010 Workhorse W20 Or W22 Chassis

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching