What is the Correct Trailer Wiring for 2007 Ford E-350 Van?

Question

Question:

I want to know if part number 118243 will install on my 2007 Ford E-350 super duty? It did not come with the 4-flat connector but it does have the trailer connectors on the rear of vehicle.

asked by: Jerrye K

0

Expert Reply:

There is a solution for you but Replacement Harness # 118243 is not a fit for your 2007 Ford E-350. If you have the factory tow package connections you will want the Reese Multi-Plug Wiring Harness for Factory Tow Package # 74682. This harness will give your van a 7-way RV-style and a 4-pole flat connector and plugs into the factory 7-way socket on your E-350.

I've added a link to a video review of this part for you to take a look at.

expert reply by: Kyle S

0

Answer 1

If you don't already have a 4-way wiring harness, we need to start there to get your 7-way. For a 4-way, I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56020 which plugs in behind the tail lights of…

view full answer...

Answer 2

We have a great solution but nothing that will pluginto the factory connector. Instead use the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat part #ETBC7. This will give you a 4 and 7-way connector which includes a…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

What is the Correct Trailer Wiring for 2007 Ford E-350 Van?

Featured Help Information

Miscellaneous Media

Continue Researching