Does Thule Hull-A-Port XT Kayak Carrier Fit Rhino Rack Square Crossbars

Question

Question:

Does this particular kayak carrier fit the rhino rack euro square bar, part #: JA3132?

asked by: Nick

0

Expert Reply:

Yes, the Yakima JayLow Kayak Carrier # Y04073 that you referenced does fit the Rhino Rack Euro style square crossbars.

expert reply by: Jameson C

0

Answer 1

The factory rails on your A.R.E. topper are made by Yakima. For a complete roof rack system on your truck with the A.R.E. topper you will need the following parts: 4 of the Yakima Control Towers #Y8890027 2 sets (2ea) Yakima Landing Pad 1 #Y00221 1…

view full answer...

Answer 2

The Thule Track Mount Roof Racks are all going to be limited to 165 lbs therefore this will give you a good idea of how much weight can be carried. However, the camper top manufacturer may have a lower weight capacity figure so if that is the case…

view full answer...

Answer 3

For a great roof rack system that can mount onto your MX series camper shell, I recommend the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells #Y01-140B. This complete roof rack system comes with 2 RTC-style tracks with dual C-channels that…

view full answer...

Answer 4

Yes the Yakima JayLow Kayak Carrier w/ Tie-Downs part #Y04073 will work with the Rhino Rack 2500 Series Heavy Duty Crossbars. The JayLow will accommodate bars up to 1-11/16" in thickness and the 2500 Series bars are 1-1/2" thick.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Does Thule Hull-A-Port XT Kayak Carrier Fit Rhino Rack Square Crossbars

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching