Recommendation to Replace Dexter 023-326-00 Electric Brake Assemblies on Trailer
Updated 04/03/2018 | Published 04/02/2018
Question:
i would like to change the electric trailer brake assembly on my fifth wheel and on the back plate the number is 023-326-00 and i would like to put the self adjusting brake what is our number for lef and right i am interested to bye two left and two right akebrk-7-sa and akeblk-7-sa can i put at the place 023-326-00
asked by: Jean R
Helpful Expert Reply:
Based on my research, the 023-326-00 number you found at the back of your existing brake assemblies refers to the Dexter 12 inch x 2 inch electric brake assembly that is designed for 6,000 pound axles and features a 5 bolt mounting flange pattern.
If this is correct, you can indeed use the etrailer.com Electric Trailer Brake Kit # AKEBRK-7-SA that you referenced. These 12 inch x 2 inch self-adjusting assemblies do not require periodic manual adjustments like standard units. They are designed for 6,000 pound axles like what you have and will bolt up to the 5 bolt mounting flanges you have on the trailer. Both the Left Hand and Right Hand assemblies are included in this kit, so you if you need two of each, you will simply need to order two kits.
I have attached a short video demonstration on this product that you can also check out.
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer brakes
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Q&A: Replacement Brake Assemblies for Dexter 023-326-00 and 023-327-00
- Q&A: Brake Replacement for Dexter 023-326-00 Brakes
- Video: How to Choose a Trailer Brake Controller
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Suspension Enhancement
- Article: How to Tell the Weight Rating of a Trailer Axle
- Video: Measuring To Choose The Right Trailer Axle
- Search Results: trailer wiring
- Q&A: Replacement for Atwood 61101 Brake Actuator
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Shop: Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness - Dash Knob - Proportional
- Shop: Brake Controller
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: trailer jack
- Q&A: Dometic Soft Start for Dometic B59516.711C0-MX
on Trailer Brakes
