Replacement Saddle Pin Recommendation for B and W Companion Hitch

Question

Question:

I have lost one of the pins that hold the top halve to the bottom halve of the hitch. What size are those pins 1/2inch is too large and can I buy another at hardware store? If not can I order from you?

asked by: Joe H

0

Expert Reply:

Sounds like you are looking for a replacement saddle pin for your B and W Companion hitch. The correct replacement would be the part # BW3025-119A.

expert reply by: Jameson C

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Hey Mark, thanks for writing in. I can definitely help you find the right gooseneck pin box for your Alliance, but I will tell you that typically, the height of the goosebox is very similar to the height of the pin box and 5th wheel hitch it is…

view full answer...

Answer 8

Hi Thomas, From what info I could find, your 2026 Alliance Avenue 30bh comes with a Lippert Rota-Flex pivoting pin box that uses the Lippert Rhino pin box bolt pattern. The B&W 5th Wheel to Gooseneck Pin Box part #BW23RV is what I'd suggest…

view full answer...

Answer 9

Hey Steven, this is a great question but yes the correct bearing kit you need for your 2025 Grand Design 27BH with 5,100 lb axles is the kit for 5,200 lb axles part #BK3-300 which comes with the correct bearings, races, and seal. Did you have a…

view full answer...

Replacement Saddle Pin Recommendation for B and W Companion Hitch

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching