Recommendation For Reese Replacement Trunnion Bars For Weight Distribution

Question

Question:

I have a Reese 1200 pound trunnion bars for weight distribution I am not seeing much lift on the truck when I pull up on the leavers, This is a used toy hauler I just bought by the way. After getting a tongue scale the weight is 1400 lbs. My question is if I order 1500 or 1700 bars will this help with the weight distribution?

asked by: Dan A

1

Helpful Expert Reply:

As you mentioned, the trunnion spring bars do come in various weight ratings. Increasing your weight distribution capacity will improve your weight distribution. Either the 1500-lbs trunnion spring bars, Item # RP58369, or the 1700-lbs trunnion spring bars, Item # 66010, will work with several Reese weight distribution systems. I recommend going with the 1700-lbs trunnion spring bars, Item # 66010, so long as it will work with your weight distribution system.

Send me details about your weight distribution system, like model/part number, and I can make a specific recommendation.

I have attached a help article and a video for you to check out.

expert reply by: Brint H

1

Answer 1

I checked with my technical contact at Reese and he said that as long as your trunnion bars are the Reese branded bars, like part #66010, they can be used with the Replacement Head and Shank for Reese Weight Distribution Systems, #RP54980. He also…

view full answer...

Answer 2

With your tongue weight at 1,175 lbs when loaded, you also need to account for any cargo weight behind the rear axle as well to get the total tongue weight rating. I've attached an article to assist. You are correct that your current system is…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

Hey Tim, the Brandmotion FullVUE Digital Rear View Mirror with HD Backup Camera #BM86YR that you referenced does come with a camera in the third brake light/CHMSL location that you asked about. I attached a picture that shows the contents of the kit…

view full answer...

Recommendation For Reese Replacement Trunnion Bars For Weight Distribution

Featured Help Information

Miscellaneous Media

Continue Researching