Length of Spring Bars on Curt TruTrack 17500 Weight Distribution System

Updated 03/12/2018 | Published 03/11/2018

Products Featured in This Question

Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW

(623)

$609.95

Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW

(843)

$860.09

Thin Walled Socket for Equal-i-zer Hitches

(100)

$68.63

Question:

Hi, Im trying to determine if the the Curt TruTrack 17500 will fit my trailer. I only have an opening on my trailer from 25-29inch along the A-frame from the center of the ball propane mount is a fixed welded design. The Curt 17500 recommends setting the frame brackets 4 inches from the end of the trunnion bar. Therefore the most obvious question is: What is the length of the trunnion bar? Could you measure and let me know?

asked by: Al

Expert Reply:

I checked and the spring bars of the Curt TruTrack Weight Distribution System # C17500 are 35" long and 1-1/4" wide and based on your photo and the necessary positioning of the brackets. I do have a solution which could work for you, however. Since the TruTrack you asked about would be for a 900 lb total tongue weight I assume that you need a system with that tongue weight rating. The Equal-i-zer # EQ37120ET has brackets that can be positioned 27" - 32" from the center of the coupler. It features 4-points of friction sway control which prevent your trailer from swaying and create a level ride. It comes with everything you need for installation but it is recommended you use thin-walled socket # EQ70-00-4800 for installation of the hitch ball.

I've added links to video reviews of the Equal-i-zer for you to take a look at.

expert reply by: Kyle S