Replacement Parts for Curt TruTrack Weight Distribution System # C17500

Updated 05/28/2025 | Published 02/14/2019

Products Featured in This Question

Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW

(623)

$609.95

Replacement Head for Curt TruTrack Weight Distribution System w/ Sway Control - 10,000 lbs

(8)

$335.06

Replacement Frame Brackets for Curt TruTrack Weight Distribution System w/ Sway Control

(60)

$94.01

Replacement Spring Bar Lift Tool for Curt TruTrack Weight Distribution System w/ Sway Control

(66)

$35.04

Replacement L-Pins and Clips for Curt TruTrack Weight Distribution System w/ Sway Control - Qty 2

(152)

$10.74

Replacement Trunnion Spring Bar for Curt TruTrack Weight Distribution System - 1,000 lbs TW

(32)

$64.93

Replacement Hardware Kit for Curt TruTrack Weight Distribution System w/ Sway Control - 5K to 10K

(22)

$43.00

Question:

Last summer I purchased a Curt 17500 distribution hitch from a man at his moving sale. After checking the number to make sure it would fit we made a deal. I dont have a travel trailer as of now we are still saving for one. I was ?Happy? as could be. Fast forward to yesterday when I decided to open the box and get the instructions out, many many parts missing. I was scamed bad. Are parts available for this model.

asked by: Douglas M

Helpful Expert Reply:

I have some good news to offset some of that anger from recently being scammed. We do indeed have all of the replacement parts available for the Curt TruTrack Weight Distribution System # C17500 and I will list them out below.

Replacement L-Pins and Clips # C17513
Replacement Spring Bar Lift Tool # C17512
Replacement Trunnion Spring Bar (quantity of 1) # C17536
Replacement Frame Brackets # C17508
Replacement Hardware Kit # C17550
Replacement Head # C17507

I have also attached the complete installation manual for the Curt TruTrack below that you can take a look at in case that wasn't in the box either.

expert reply by: Chris R

Ken

4/15/2025

Hey Chris, By chance, do you know if I am able to get parts for the Weight Distribution Head assembly? I don't mean extra Pins or bars, I mean the actual internal parts of the Curt Weight Distribution Head Assembly. The one with the spring loaded Detent Balls. I bought a used trailer and it came with the hitch but, it was never greased and the detent housing on one side of the hitch was cracked as a result so, I need the actual disk that houses the two Steel Balls that rest in the detent depression of the disk itself. I also need the housing piece that the bolt and internal spring assembly goes into because the top of that housing is also wallared out and unusable. Any guidence would be greatly appreciated! Sincerely, Ken

Robin H.

4/16/2025

@Ken you will have to replace the head. I attached a link to all of the Curt WDH replacement heads below.

Helpful Links

dept-pg-accessories_and_parts-sf-weight_distribution_hitch-pt-head-pm-curt.aspx

Ken

4/16/2025

@RobinH Hmm... So, the head is completely serviceable, I don't understand why they wouldn't sell the parts. It seems like a lot to spend $300 to $500 on a new head when the parts are so easily replaced. Is there a way to get the parts from the manufacturer by chance?