Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replacement trunnion bar fits your Curt TruTrack weight distribution system with integrated active sway control (C17499). Constructed of forged steel, this bar has a maximum tongue weight rating of 800 lbs.
Features:
Note: If you have an older model Curt TruTrack system that came standard with 32" spring bars, this 35-9/16" long bar will work. But you must replace both spring bars to ensure that the same length bars are installed on the system.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the Replacement Trunnion Spring Bar for the Curt TruTrack Weight Distribution System. This unit replaces one spring bar from your 8,000 pound rated Curt TruTrack Weight Distribution System with Sway Control, part number C17499. It's constructed from a forged steel construction. It's very strong and durable. It has a really nice black powder coated finish on it. It helps it look good for a long time and does a great job at resisting rust and corrosion.
This portion over here is the portion that fits into the weight distribution head assembly, and then this end here is the portion that's held in place with the frame brackets. Tongue weight rating is 500 pounds to 800 pounds. The overall length of the bar is 35 x 9/16" long.Please note, if you have an older model Curt TruTrack System that came standard with 32" long spring bars, this one will work but you must replace both spring bars to ensure that the same length bars are installed on the system. That's going to do it for today's look at the Replacement Trunnion Spring Bar for the Curt TruTrack Weight Distribution System.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike L.
3/29/2018
According to Curt, the different TruTrack weight distribution heads are not interchangeable. Since you are using a lighter capacity spring bar in a high capacity head, removing a bit of material from the end of the bar is an acceptable practice as long as you do so slowly. Being too aggressive in grinding on the product can heat up the metal, changing its physical properties as well as its weight capacity.