Available Hubs That Use Bearings 25580 and LM67048
Updated 03/07/2018 | Published 03/06/2018
Products Featured in This Question
Question:
Hello, the axles I have take bearing numbers LM67048 and 25580. Is there a conversion hub available? Thank you
asked by: Jason H
Expert Reply:
We do have hubs that use your same set of bearings, parts # 25580 and # LM67048.
Please note that both of these bearings can be used as an inner bearing or as an outer bearing so you will want to be sure which part goes where as you review our range of hubs shown on the linked page.
As examples, if the inner bearing is 25580 and the outer bearing is LM67048 we have compatible 6-lug hubs such as hub/drum # 8-201-5UC3-EZ which is rated for 5200-lb axles and idler hub # 8-213-5UC1.
You can refer to the two linked articles for more helpful information on bearings.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- 25580 / 14125A
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Search Results: bd2~655
- Shop: Dexter Trailer Idler Hub Assembly for 5,200-lb Axles - 6 on 5-1/2
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Q&A: Flange Nut to Fit with MORryde Shoulder Bolts for Trailer Suspension
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Search Results: dexter 8 213
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Q&A: What is the Difference Between 1.25 Inch Trailer Bearings
- Q&A: Does Trailer Wheel Hub/Brake Drum Need to Be Replaced if Inside Surface is Grooved
- Search Results: alltrek 4000
- Search Results: hub
- Video: Set up: Dometic 310 Part-Timer RV Toilet on a 2016 Keystone Hideout Travel Trailer
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: A Closer Look at the 7-Piece Installation Set for Bearings, Races, and Seals
- Video: Deka Butt Connectors Detailed Breakdown
- Video: Install: etrailer Electric Trailer Brakes on a 2019 Grand Design Reflection 150 Fifth Wheel
- Q&A: 5200 lb Axle Brake Assembly Torque Specs
- Video: Standard Axle Brake Assembly Hub and Drum Installation FAQ
- Q&A: Replacement Idler Hub Options For A Dexter 8-135 Idler Hub
- Q&A: Replacement Hub Solution for Dexter 8-133
- Search Results: dexter 008 201 09
- Video: Mount: Curt Trailer Hitch Receiver on a 2012 Subaru Outback Wagon
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2012 Subaru Outback Wagon
- Search Results: lithium battery
- Search Results: aftermarket below bed rails 5th wheel hitch