Replacement Hardware for Yakima Doubledown Hitch Mounted Bike Rack

Question

Question:

Im seeking a bolt for a doubledown 4 bike rack - Yakima bike rack

asked by: Joseph S

0

Expert Reply:

In order to replace the bolt for the Yakima DoubleDown 4 Bike Rack, you need to look at the Replacement Hardware for Yakima Doubledown Hitch Mounted Bike Rack # Y8890206.

•Replacement hardware for Doubledown 2, 4 and 5
•Includes: (1) bolt, (2) flat washers, (1) nut and (1) wrench for rack assembly
(1) hitch bolt, (1) lock washer and (1) flat washer to secure rack in hitch

# 8890206 Yakima Replacement Hardware for Doubledown 2, 4 and 5 Hitch-Mounted Bike Rack

expert reply by: Timothy G

0

Answer 1

The Taskmaster 5.30R12 Radial Trailer Tire part #TT53012C is our best radial trailer tire option in this size. The radial plies will keep the tire cooler on the highway which reduces the chance for blowouts. It also has a higher speed rating than the…

view full answer...

Answer 2

Yes, The Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire #AM10130 will fit the same 12 inch wheel with a 4 inch width that your existing 4.80-12 size tires are mounted to. The ST145/R12 tire will be about 0.8 inches larger in diameter, so you…

view full answer...

Answer 3

Hey James, based on what you listed having on your Harbor Freight trailer the Kenda Karrier S-Trail ST145/R12 #AM35351DX would work great as its the same size wheel and bolt pattern and the tire is a radial like you are wanting. The Load Range of the…

view full answer...

Answer 4

Hey Lisa, so I checked with Yakima and the correct MightyMounts for your 2011 BMW 328i with OEM Crossbars is the Universal set part #Y03590 and not the part number you mentioned.

view full answer...

Answer 5

Yes, the Yakima Mighty Mount 23H Accessory Adapter for Factory Roof-Rack Crossbars #Y03523 will fit the factory crossbars on your 2018 Subaru Outback.

view full answer...

Answer 6

Your Yakima HighRoller bike racks will work with the Universal MightyMounts #Y03590. I have cut out a section of the instructions from both the HighRoller and the MightyMounts and the HighRoller specifies using MightyMounts while the linked…

view full answer...

Answer 7

The Replacement Hitch Bolt #Y8890200 is the correct bolt for your Yakima HoldUp Bike Rack #Y02443. We also have the Replacement Hitch Hardware #8890260 if you need to replace the insert inside the Spine #8890277.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Replacement Hardware for Yakima Doubledown Hitch Mounted Bike Rack

Continue Researching