Replacement Kodiak Brake Kit for UFP DB-35 Brakes on Trailer
Published 02/08/2018 >
Products Featured in This Question
Question:
Hello Chris, I talked with the MFR and they told me that the Their bake kit would be DB35. I want to go with Kodiak breaks. What kit would I need.
asked by: Adam R
Expert Reply:
Based on my research, it looks like the UFP DB-35 Brake Kit is for 3,500 pound axles and uses the # L68149 inner bearing and # L44649 outer bearing. I highly recommend that you verify this by measuring the existing bearings or the spindle where the bearings sit.
For a replacement Kodiak Brake Kit, the part # K2HR35D should be the correct assemblies. This kit includes 2 Dacromet-plated, 10 inch hub-and-rotor assemblies, calipers, and mounting brackets. They are designed for 3,500 axles and use the above mentioned bearings.
I have attached an installation video for this brake kit that you can also check out.
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Continue Researching
- Shop: SmartStraps Tactical Ratchet Tie-Down Straps - 1" x 10' - 500 lbs - Qty 2
- Shop: Dexstar Steel Spoke Trailer Wheel - 15" x 5" Rim - 5 on 4-1/2 - White Powder Coat
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Dexstar Steel Mini Mod Trailer Wheel - 14" x 5-1/2" Rim - 5 on 4-1/2 - White Powder Coat
- Q&A: Troubleshooting a Dexter Vault Hub that Has Popped Out Slightly
- Q&A: Will The Curt Class 3 Hitch C22ZV Fit A 2025 Toyota Tacoma
- Q&A: Trailer Hitch And Wiring For A 2024 Toyota Tacoma
- Search Results: disc brake kit
- Search Results: wf~9855
- Search Results: vault
- Q&A: Option For Replacing Dexter Axle 89" HF 72.5 SC 2"x2" Square Axle
- Search Results: ufp
- Search Results: ufp caliper
- Search Results: brake caliper
- Search Results: db35
- Shop: WFCO Auto-Detect RV Converter Charger - Deck Mount - 12V - 55 Amp
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Dexter Vault Hybrid Lubrication Kit for 4,200-lb and 5,200-lb Axles
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Shop: Brake Controller
- Shop: Gooseneck Hitch
- Shop: Suspension Enhancement
- Shop: Fifth Wheel Hitch
- Shop: Base Plate for Tow Bar
- Q&A: Replacement Brake Setup for Trailer with DB-42 Disc Brakes
- Q&A: Which Caliper Should Be Used With The Dexter 9-3/4" Hub-and-Rotor Assembly DX82UR?
- Q&A: Brake Upgrade Reccomendation For My UFP DB-42 Oil Bath Brakes
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)

