Result: vault

Thanks for the pictures Brian. Yes, you are correct the Replacement Inner Member for Dexter DX7.5L Actuator item #DX99FR will replace your UFP A-70 surge brake actuator. The A-"number" was for the weight capacity of the coupler; an A-60 was…

The only thing I found on your Dexter 70-7 is the Replacement 13" Rotor for Dexter Disc Brakes #K71-631-00 which has 70-7 stamped on it. The #K71-631-00 fits 8,000 lb. Dexter disc brake kits like the #K71-646-2, #K71-646-2-91 or #K71-646-2-90.

The O-rings of the #DX52UR goes between the covers and the hub and the zerk fitting is a replacement if needed. We don't have ability to make a video for this quite yet though.

We have just what you need based on the dimensions you listed. The correct grease seal you need is the part #168255TB which has outer diameter of 2.561 and an inner diameter of 1.687 inch.

Hey Steve, thanks for the pictures. That's normal. The Dexter vault hubs popping out slightly like that shows the system is pressurized. It'll pop out all the way if there's a leak or a problem. I would check the other one though. It…

Yes, Tekonsha released the part #3062-P which is a brake controller install harness that fits your 2019 Subaru Ascent and would work well. I attached a picture that shows where you'll find it on your vehicle too. For a brake controller I would…

Hello Josh, thanks for reaching out. Yes, the Curt Class 3 Hitch #C22ZV will indeed fit your 2025 Toyota Tacoma. It is a no drill install and easily bolts on using the included hardware. It will be very easy to put on. Just 3 bolts on each side and…

Hi Danny, Evangeline asked if I could get you helped out as she is climbing around the roof of an RV at the moment and couldn't get to a computer, so here I am. Let's get into it. Since you have a 3,500 pound axle with Dexter's Vault…

Hey John, I am afraid that the info in that previous question you read is still going to hold true. The BT 15118 and 09074 bearing sizes are obsolete and are no longer readily available. Nor are there any suitable substitutes that we can offer. At…

We only have one option for a load range E ST145/12 trailer tire and wheel, which is the Kenda Karrier S-Trail ST145/R12 Radial Tire #AM10140.

We do have a lift kit for your Lippert 7K torsion axle but the Dexter Torflex Lift Kits like part #K71-725-02 are designed to fit specific Dexter torsion axles. For example, the above mentioned kit will only fit a #12 Torflex axle that has a 5,500 -…

Those definitely look like Prodigy P2 #90885 troubleshooting codes! You can verify this if the numbers you are seeing are blue. If they are red then this means you have the discontinued Prodigy P1 90185. Regardless of which one you have, the…