What Under-Bed Puck System Works with a 2008 Ford F-450

Question

Question:

Reese elite item #rp30126 under bed rail and installation kid . Can I install this product in my truck? 2008 Ford F-450

asked by: Julio

0

Expert Reply:

I do have the correct system for you but the Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel and Gooseneck Trailer Hitches part # RP30126 will not fit your 2008 Ford F-450. Instead, you will want to use the Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Trailer Hitches part # RP30073.

The above under-bed kit is designed to be used with Reese Elite Series and Signature Series 5th wheel hitches like the Reese Elite Series 5th Wheel Trailer Hitch part # RP30921.

expert reply by: Conner L

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 4

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 5

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 6

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

No sweat! You'll just need to install a 12-volt outlet kit, part #RM-9332. The socket would be located under the dash, so you can easily locate it to plug in the Patriot. The outlet would wire directly to the vehicle's battery. Each time you…

view full answer...

Answer 9

Hey Robert, the only frame mounted base plate kits we have for your 2021 Jeep Wrangler Unlimited like the Roadmaster part #RM-521453-5 require either the factory steel or plastic bumper to verify for sure they will work. For aftermarket bumpers you…

view full answer...

Answer 10

Hello Thad, Thanks for getting that drawing to me. I went ahead and pulled the Patriot Hitches 2" Adjustable Drop Hitch Adapter - 11" Rise/Drop - 7K - Gloss - Silver Accent #PH38PR from the warehouse so I could compare it to your drawing.…

view full answer...

What Under-Bed Puck System Works with a 2008 Ford F-450

Featured Help Information

Miscellaneous Media

Continue Researching