What Size Ball Mount will Fit in etrailer Ball Mount Bag ETBMB

Question

Question:

Does this bag fit and carry a triple ball mount hitch?

asked by: Nioclas D

0

Expert Reply:

To determine if a given ball mount will fit into bag # ETBMB you will need to go by the dimensions of the bag. The bag is 16-1/4 inches long, 5-1/4 inches deep, and 4 inches wide. Depending on how large your ball mount is it may or may not fit.

We also have CE Smith Ball Mount Storage Bag # CE27481 which is 15 inches long, 6 inches tall, and 4 inches wide.

expert reply by: Michael H

0

Answer 1

Yes, you would want to use an anti-rattle for the 1-1/4 inch portion of the adapter. For that the Hitch part #C11257 would work well. It uses a U-bolt to hold the adapter tight to the hitch tube.

view full answer...

Answer 2

The etrailer.com Ball Mount Bag #ETBMB is 16-1/4" long x 5-1/4" high x 4" wide and may fit your Hidden Hitch 80240 our part #40346 ball mount at an angle. Another option is the Rightline Gear Custom Roll Bar Storage Bag - Jeep -…

view full answer...

Answer 3

For your 2020 Ford Expedition I recommend the B&W Tow & Stow 3-Ball Mount #BWTS10049B. This mount has all 3 common ball sizes 1-7/8", 2" and 2-5/16". It has a maximum capacity of 10,000lbs which exceeds the maximum 9,300lbs…

view full answer...

Answer 4

What's up Cheddar, I think you'd like our etrailer Ball Mount w/ Pre-Torqued 2" Ball - 2" Hitch #e87DR since it has 6" of drop for your big lifted Tahoe. It's ready to grab and tow, you don't have to install any balls…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

What Size Ball Mount will Fit in etrailer Ball Mount Bag ETBMB

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching