Search: comfort ride   >  

Hey Warren, thanks for reaching out again! The MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR will need to be installed at the middle hanger where your equalizer is. If you end up wanting to install more of these then you can start…

We don't have these parts fit guided for individual trailers, but as long as your 2018 Grand Design Reflection 150 5th Wheel trailer has tandem axles with a 7000-lbs each capacity, the Roadmaster Comfort Ride #RM-2460-2570 is the correct…

Based on the information I could find on your 2023 Jayco Jayfeather 30QB travel trailer it appears you are going to have 4,400lb axles. You are going to need to verify the diameter of your current axles as some manufacturers like Lippert use a…

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

I went ahead and reached out to my contact at MORryde, and she confirmed that the X-Factor Crossmember for CRE, SRE, or Stock Leaf Spring Suspension #MR33WR will come with new mounting hardware. The plates on the cross member do add thickness, so the…

According to our contact at MORryde, the MORryde X-Factor Crossmember for CRE, SRE, or Stock Leaf Spring Suspension #MR33WR works with the Road Armor cushioned equalizers so this would be what you'd want.

MORryde has a version of the X-Factor Crossmember that was designed to work with the CRE3000 you have with the part #MR33WR.

It is possible that the Lippert Components Center Point #LC1565391 can work together with the Roadmaster Comfort Ride Shock Absorbers #RM-2460, though they have never been tested together. An educated guess is that it would be problematic because the…

Despite what the manufacturers of these equalizers say, the axle/wheel spacing isn't the right way to figure out the best fit for upgraded equalizers, including the MORryde CRE3000. The wheel spacing is more of a guideline, so to determine the…

The Correct Track Trailer Alignment and Lift Kit #RR23QX essentially just stacks onto your current hangers to lift your trailer by 1-1/4" or 2-1/4". If you're looking for something that will give you more then there are a few other…

There is no functional difference between the older gold and the current red versions of the Dexter EZ Flex Equalizers part #K71-652-00. They just decided to powder coat them red recently.

To ensure that the Dexter E-Z Flex Suspension Kit #K71-653-00 is the correct kit for your 2022 Grand Design Imagine XLS 22MLE you will want to verify the hole center measurement on your current equalizer. This particular Dexter unit is designed to…