Air Line Compatibility with Air Lift Union T-Piece for 1/4-Inch Air Lines AL21838

Question

Question:

will this work with Firestone air tubing?

asked by: Travis

0

Expert Reply:

Yes, the Air Lift Union T-Piece for 1/4-Inch Air Lines # AL21838 will work with standard 1/4-inch air line tubing on any brand of air bag suspension kit whether it is AirLift, Firestone or another brand. All such systems use the same air tubing, like part # F9416.

expert reply by: Jesse M

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

Hey Mike, welcome back! Both the Firestone Ride-Rite #F2613 rated for 5,000 lbs, and the Firestone Ride-Rite Red Label #F2709 rated for 7,500 lbs will keep you at factory ride height when you aren't towing. All you need to do is run the air bags…

view full answer...

Answer 5

The biggest pro to using one valve stem to maintain air pressure in an air bag kit is that you always know that both bags will have an equal amount of pressure in them. If you have an application where equal pressure on both sides is always the norm…

view full answer...

Answer 6

Hey George, congrats on the new truck! You are definitely going to need to support the axle when lifting your Silverado with the Pacbrake Alpha HD Pro Air Bag Suspension Kit item #PB25RV. Lifting your truck by the frame will stretch the bags too far…

view full answer...

Answer 7

Hey Glenn, I wish we could help but what you have now was made before January 2025 which nothing we offer now is compatible with as there was a big change put into law around that time. There isn't a current replacement made for what you have…

view full answer...

Answer 8

Hey Ryan, thanks for reaching out. We have exactly what you're looking for, just not as an all-in-one kit. The Equal-i-zer Weight Distribution System #EQ64FR is rated for the 16k that you need. It does come with a 2-1/2" shank that has a…

view full answer...

Answer 9

Hey Matt. If your 2025 Ford F-350 has the factory puck system, I recommend the Gen-Y item #GY43XR. This offset adapter is going to drop down into your gooseneck hole and front pucks and push the gooseneck ball back 5" towards your truck's…

view full answer...

Answer 10

Hey Robert, what you'd need is an Air Lift Union tee part #AL21838 which would allow you to use a single inflation valve for both bags. I'm still a little surprised they don't just include this. What vehicle do you have?

view full answer...

Air Line Compatibility with Air Lift Union T-Piece for 1/4-Inch Air Lines AL21838

Product Page this Question was Asked From

Continue Researching