Recommended 4-Way Flat Connector that Retains the Function of Factory 7-Way To Power Accessory

Published 12/01/2017

Question:

Thank you for the very quick answer, I appreciate it and this is why I always trust eTrailer so much. But unfortunately, for this time, it appears that your answer is incorrect because the factory Mopar 7-ways plug have a rectangle (almost square) connector on the body side of the plug. I attached a JPG of the factory Mopar part that is installed on most FCA vehicles, you’ll see (sorry for the angle) the rectangle connector behind the plug.

asked by: Simon C

Expert Reply:

Since you already have the factory 7-way, you only need the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # C55384. This will install right behind your 7-way to give you the 4-way plug you need for your backup camera. This will retain the functionality of your 7-way as well.

expert reply by: Jason S

click to enlarge

Simon C.

12/1/2017

Jason S.

12/1/2017

Thanks for the photo. It appears that Mopar went back to their older style connector, and if so, I have a solution for you. I recommend you use the 7-Way & 4-Way Replacement Connector for Dodge OEM Style Plugs # 42145 to get the US Car connector and then use the T-connector # C55384 for your 4-way.