Trailer Hanger Kit Recommendation for Trailer with 25-/4 inch long Leaf Springs

Published 11/06/2017

Products Featured in This Question

1-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long

(2221)

$31.05

Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear/Center

(700)

$58.06

Question:

I am looking to replace all the hardware spring hangers,shackles, equalizers on my tandem axle trailer with mobile home axles. I believe the springs that are on it are SP-115275. The tires are 8/14.5 . I wasnt sure what kit I needed. Thanks

asked by: Tyler S

Expert Reply:

Mobile home axle components can be hard to find replacement parts for, but if you have leaf springs part # e46SR the part # APT9 would be a great hanger kit to use.

The distance on center between the spring hanger bolt holes for dual axle setups, with the # APT9 Tandem-Axle Trailer Hanger Kit, should be 29-1/2 inches for double eye springs that measure 25-1/4 inches on center between the spring eyes and for axles that are 3 inches in diameter. This will put your axle spacing somewhere between 33-1/2 and 34 inches.

This kit comes with everything in the picture I attached, equalizers, shackles, hangers, bolts, and nuts.

expert reply by: Jameson C