bing tracking image
Customer Service My Orders
  1. Home
  2. Help Videos And Articles
  3. Trailer Suspension Parts Help Hub
  4. Trailer Suspension Parts Q&As
  5. Question 276313
Q & A Icon

Recommended Hanger Spacing for 24-7/8 Inch Long Leaf Spring with APT4 or APT3HD Hanger Kit  

Updated 02/12/2018 | Published 02/10/2018



Question:

What is the recommended distance between hangers for the APT4 and APT3HD hanger kits using 24 7/8inch long springs?

0

Expert Reply:

Based on my research, when using the Universal Group Leaf Springs # SP-222275 that has a spring eye length of 24-7/8 inches with either the Redline Tandem Axle Hanger Kit # APT4 or # APT3HD, you will want a distance of 29-1/2 inches between the hangers on your trailer.

Both hanger kits you referenced include everything needed to attach 4 leaf springs to your trailer frame. I have included a couple short video demonstrations on these kits along with an article on positioning a trailer axle that you might find helpful.

expert reply by:
0
Chris R

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>
Explore Expert Info Our Expert
on Trailer Suspension Parts

Videos

Help Articles

Expert Answers

Others Also Watched
What to Know About the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs
Measuring To Choose The Right Trailer Axle
A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
How to Choose a Trailer Brake Controller
etrailer VS Dexter Self Adjusting Brakes Comparison
Review of Lippert Trailer Suspension Parts - Equalizer Upgrade Kit - LC53CK
Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
Ultimate Overview of the MORryde Suspension Upgrade Kit for Tandem Axle Trailers
4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles Spec Review
Comprehensive Review: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers
What to Know About the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers
Others Also Read
Double-Eye Trailer Suspension System Review
Where to Position the Trailer Axle?
Trailer Wiring Diagrams
Brake Controller 7- and 4-Way Installation Kit (ETBC7)
How to Measure for Trailer Hitch Drop
How to Measure Your Trailer Wheel Bolt Pattern
Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
How to Accurately Measure Trailer Leaf Springs
Trailer Lighting Requirements
How to Tell the Weight Rating of a Trailer Axle
How to Choose the Right Trailer Hitch Class
Most Popular Wheel Bearings
Others Also Asked
Determining If Trailer Suspension Is Correct Since It Has 28-3/4" Hanger Spacing Instead Of 29-1/2"

Thanks for the measurements! You are correct that the Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear #APT5 you were looking at is designed around 29-1/2" hanger spacing but your suspension is a bit…

view full answer...
Tandem Axle Trailer Spring Hanger Kit and 6K Leaf Springs

The hanger kit I recommend is part #APT3HD which includes front, center and rear hangers, equalizers and bolts. This kit is good for axles up to a 7K rating and most 3-inch diameter axles are rated for 6000 to 7200-lbs. The linked video will let you…

view full answer...
Determining Spring Hanger Spacing When Installing 4-Leaf Double-Eye Spring #PR4B

When installing trailer suspension I recommend that you completely mock the setup to determine the best placement for the hangers. To do this I would put all of the suspension together and clamp it in place with the rear shackles at a very slight…

view full answer...
Trailer Suspension Kit and Leaf Springs Recommendation for a Tandem Axle Boat Trailer 4,600 lbs

As long as you are replacing everything (hangers, springs, hardware, equalizer), then yes, you can use our trailer suspension kit, #APT5. In fact, this is the kit that I recommend for your trailer. The hangers must be welded to the trailer. The holes…

view full answer...
Can 25-1/4 Leaf Spring and Dexter Axle HD Suspension Kit Fit a 31 Axle Spacing

The Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers #K71-359-00 is ideal for 33" axle spacing but since the shackle straps are able to rotate they can be used for varying axle spacings that are near that 33" mark. The best thing…

view full answer...
What Rough Hanger Spacing Should Tandem Axle Trailer with 25-1/4" Springs Have?

Assuming you're using a 7-3/4" equalizer like what's included in the Hanger Kit #APT5, your hangers should be roughly 29-1/2" between the front and center hangers, and also 29-1/2" between the center and rear hangers. With a…

view full answer...
Trailer Hanger Kit Recommendation for Trailer with 25-/4 inch long Leaf Springs

Mobile home axle components can be hard to find replacement parts for, but if you have leaf springs part #e46SR the part #APT9 would be a great hanger kit to use. The distance on center between the spring hanger bolt holes for dual axle setups, with…

view full answer...
Tandem Axle Hanger Spacing for Double-Eye Spring e54SR

With the 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/8" Long #e54SR on a tandem axle trailer, the distance between the front and center hangers and the center and rear hangers should be 29-1/2". I have added a link to our…

view full answer...
Dimensions of Hangers and Equalizers on Tandem Axle Suspension on 16-Ft Trailer

Front and rear springs hangers should be equally spaced around the center hanger and spring equalizer. It may be that your trailer was modified (if not originally built) with a different height center hanger and that might be how the spacing became…

view full answer...
Hanger Spacing for Tandem Trailer with 25-1/4 inch Leaf Springs and 7-3/4 inch Equalizers

For a tandem axle trailer using 25-1/4-inch double-eye springs like #e57SR and a 7-3/4-inch equalizer like #TREQE1 the hanger spacing should be approximately 29-1/2-inches. This is a starting point and you may need to adjust this dimension slightly.

view full answer...
Hanger Spacing With Equalizer Kit #K71-359-00 with 25-1/4 inch Leaf Springs

When using the equalizer kit part #K71-359-00 with leaf springs that measure 25-1/4 inches long like the part #e28SR the hanger spacing you'd want to use is 29-1/2 inches.

view full answer...
Tandem Axle Trailer Hanger Spacing for 25-1/4-Inch Double-Eye Springs

For a tandem axle trailer using 25-1/4-inch double-eye springs like #e57SR and a 7-3/4-inch equalizer like #TREQE1 the hanger spacing should be approximately 29-1/2-inches. This is a starting point and you may need to adjust this dimension slightly.

view full answer...