Tandem Axle Trailer Hanger Spacing for 25-1/4-Inch Double-Eye Springs

Question

Question:

I am building a trailer with tandem axles, spring length from center of hole to center of hole is 25 1/4 the equalizer is 7 3/4 what should the measurement from front hanger to equalizer hanger to back hanger be Thanks

asked by: Dan

0

Expert Reply:

For a tandem axle trailer using 25-1/4-inch double-eye springs like # e57SR and a 7-3/4-inch equalizer like # TREQE1 the hanger spacing should be approximately 29-1/2-inches. This is a starting point and you may need to adjust this dimension slightly.

expert reply by: Adam R

0

Answer 1

The suspension kit that would be the closest to what you have on your trailer would definitely be the Tandem-Axle Trailer Hanger Kit #APT9. The minor dimensional differences would not cause an issue. Since the equalizers would be 3/4 of an inch…

view full answer...

Answer 2

When setting up a new trailer suspension it is best to do a mock-up (by clamping or tack welding the parts in place) to allow you to see how the system functions. There are so many variables that is best to test. Typical spacing dimensions for…

view full answer...

Answer 3

Based on my research, when using the Universal Group Leaf Springs #SP-222275 that has a spring eye length of 24-7/8 inches with either the Redline Tandem Axle Hanger Kit #APT4 or #APT3HD, you will want a distance of 29-1/2 inches between the hangers…

view full answer...

Answer 4

The distance on center between the spring hanger bolt holes for dual axle setups, with the #APT9 Tandem-Axle Trailer Hanger Kit, should be 29-1/2 inches for double eye springs that measure 25-1/4 inches on center between the spring eyes and for axles…

view full answer...

Answer 5

Front and rear springs hangers should be equally spaced around the center hanger and spring equalizer. It may be that your trailer was modified (if not originally built) with a different height center hanger and that might be how the spacing became…

view full answer...

Answer 6

To start with, the 6,000 pound springs I suggest are #e34SR. They're 25-1/4 inch long, 5 leaf springs. I recommend either hanger kit #APT3 or #APT5 with the springs. The difference between the two hanger kits is the height of the hangers. With…

view full answer...

Answer 7

When using the equalizer kit part #K71-359-00 with leaf springs that measure 25-1/4 inches long like the part #e28SR the hanger spacing you'd want to use is 29-1/2 inches.

view full answer...

Answer 8

For a tandem axle trailer using 25-1/4-inch double-eye springs like #e57SR and a 7-3/4-inch equalizer like #TREQE1 the hanger spacing should be approximately 29-1/2-inches. This is a starting point and you may need to adjust this dimension slightly.

view full answer...

Answer 9

It is possible to have a center spring hanger that will be longer than the front and rear hangers. For an example I would have the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs, part #APT3HD. This kit has 2-1/2 inch tall front and rear…

view full answer...

Answer 10

Assuming you're using a 7-3/4" equalizer like what's included in the Hanger Kit #APT5, your hangers should be roughly 29-1/2" between the front and center hangers, and also 29-1/2" between the center and rear hangers. With a…

view full answer...

Answer 11

It all depends on the spring being used, the shackles, and the equalizers among other things. There are some suggested hanger spacing measurements but really you would mock it all up first before permanently welding the hangers in place. For example,…

view full answer...

Answer 12

The Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers #K71-359-00 is ideal for 33" axle spacing but since the shackle straps are able to rotate they can be used for varying axle spacings that are near that 33" mark. The best thing…

view full answer...

Tandem Axle Trailer Hanger Spacing for 25-1/4-Inch Double-Eye Springs

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching