Dimensions of the Lippert Components Kwikee 32 Series Double Tread Electric Step # LC372261

Updated 10/10/2017 | Published 10/09/2017

Question:

I have a 2000 Itasca sunrise, need a complete unit. Present step by Coach Step Inc. part no 725-0001 is damaged. Step is 11 inches deep, dont know how to measure , length of support/ or top of step to bottom of step ? Unit is 24 in. wide. Would kwikee 32 LC 372261 work, unit is steel and mounting holes seem to be 8X22. Unit retracts when door is closed and has a light underneath. If LC372261 would fit, could it be possible to configure light assy from Coach Step Inc to it ? What type of connector is used, square four pin? Would appreciate any help...

asked by: PETER T

Expert Reply:

The Lippert Components Kwikee 32 Series Double Tread Electric Step # LC372261 that you referenced could very well work as a replacement to your current steps. As you mentioned the mounting bolt pattern is 8 x 22 inches so you will want to be sure that it is compatible. Since the steps are 24 inches wide it should fit just fine.

The steps have a 7 inch Drop/Rise and they are 9 inches Deep so they will not stick out as far as your current steps. It could be possible to mount a light assembly if you chose to, but if you have to modify the steps then the 90-day limited warranty would most likely be voided. The connector used does have 4 pins in a square design.

expert reply by: Jon G