Available Replacement Trailer Axle Kits

Question:

am curious if you have hubs for a conversion,rim lock to either 14inch or 15 inch rims, measurements are taken off spindle...seal 1.838, inner bearing 1.370 and outer is 1.245. please advise pricing and availability. thank-you

0

Expert Reply:

To use new hubs on your existing trailer spindles the new hubs need to use the same bearings. Either bearing part numbers or dimensions such as what you provided (thank you) will allow you to confirm a proper fit.

I checked all bearings we offer for ones that have the same (or very close to the) spindle diameters you provided. Bearing # LM48548 has an inner diameter of 1.375-inches so it will fit at the spindle where it measures 1.370-inches. For the outer bearing spindle dimension of 1.245-inches we have several with an inner diameter that matches. All are shown on the linked page. Part numbers are # 15123, # 14125A, # LM67048 and # 02475.

However, we have no hub that uses inner bearing # LM48548. Our main page for hubs is linked and you will note that we have none that uses this inner bearing.

However, we do offer complete axle kits that might work for you. Our axle kits are available with hubs, such as the Dexter 3500-lb-rated axle and idler hub kit # 35545I-EZ-89.

expert reply by:
0
Adam R

Ask The Experts a Question >>


Products Referenced in This Question







Product Page this Question was Asked From


Similar Expert Q&A Pages

See More Q&A Expert Answers >>