bing tracking image
Customer Service My Orders
Q & A Icon

Installing a Trailer Brake Controller From Scratch on a 1970 GMC C30 Pickup  

Updated 09/19/2017 | Published 09/18/2017



Question:

Im putting a CM brand flatbed on my 1970 GMC C30 pickup. The flatbed is wired for a 7 way connector, and I would like to add a trailer brake controller so I can use the pickup to pull my car trailer with electric brakes. What do I need for wiring so I can use a Tekonsha Prodigy P2 trailer brake controller?

0

Expert Reply:

If you do not already have a 4-Way flat connector at the rear of your 1970 GMC C30 then you will want to start off by installing the Tekonsha 4-Pole Hardware Kit # 18252. This will simply splice into your current light functions. I have attached a sample installation video for you to follow.

The next step is to install the Universal Installation Kit # ETBC7. This comes with everything that you will need to give yourself a fully functioning 7-Way. Attached is a video of this kit being installed along with the Tekonsha Prodigy P3 # 90195. You can use the exact same steps to install the Tekonsha Prodigy P2 # 90885 as they are identical in their installation process.

I have also attached a few helpful articles that you can reference for the installation.

expert reply by:
0
Jon G
Ask The Experts a Question >>

Video/Article/FAQ this Question was Asked From

Article or Video
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>