Recommended Cover for a B&W Companion 20K # BWRVK3300

Question

Question:

Hi, What cover will fit on the BandW Companion 20K?

asked by: KP E

0

Expert Reply:

The Reese 5th Wheel Trailer Hitch Cover # RP30055 is a great option for a cover that will fit the head of the B&W Companion 20K # BWRVK3300.

If you are looking for something that more or less drapes over the hitch then I recommend going with the Classic Accessories Cover for 5th Wheel Trailer Hitch # CA80116. It measures 24" x 24" x 18" so it might not completely cover your B&W Companion, but it will be close.

expert reply by: Jon G

0

Answer 1

Your best bet will be the Classic Accessories Cover for 5th Wheel Trailer Hitch #CA80116. This cover is designed to be universal, and we have tested it and found that it will be a fit for the B&W companion hitch. The cover itself is 24x24x18 so…

view full answer...

Answer 2

We have a couple cover options that will work nicely with your B&W Companion Slider #BWRVK3400. For something that will just cover the hitch head we have the Reese part #RP30055. This is a really nice cover that secures over the hitch using an…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Recommended Cover for a B&W Companion 20K # BWRVK3300

Products Featured in This Question

Continue Researching