How Much Weight Can Landing Gear Hold
Updated 09/04/2024 | Published 09/07/2017 >
Question:
How much weight can a landing gear hold for the trailer is fully loaded will it hold it
asked by: David P
Expert Reply:
It depends on what 5th wheel landing gear you have. For example; the Lippert Landing Gear part # LC333966 is rated for 6,000 lbs. It can be used with a trailer that weighs more than 6,000 lbs because it is only supporting part of that load - the tires, wheels, and axles should be supporting the bulk of the weight. Keep in mind that the pin weight of a 5th wheel trailer is typically 20% of the loaded trailer weight.
As long as you are not going over the Gross Vehicle Weight Rating (GVWR) of your trailer and you have it loaded properly you will not need to be worried about over exceeding the weight capacity. The only time that might be a concern is if the OEM landing gear has been replaced with landing gear that is rated for a much lower weight capacity.

2010 A.
9/3/2024
My 2010 keystone avalanche weighs 11500, I need a lead leg for the landing gear.



Product Page this Question was Asked From
Lippert Manual Landing Gear Set w/ Handle - 37" Lift - 6,000 lbs
- Camper Jacks
- 5th Wheel Camper
- Landing Gear
- Steel
- 5001 - 6000 lbs
- Manual Jack
- 37 Inch Lift
- Weld-On
- 2 Jacks
- Lippert
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: landing gear
- Shop: Landing Gear Set w/ Handle - 36-1/2" Lift - 8,000 lbs
- Search Results: fifth wheel landing gear
- Search Results: at5300 seal
- Shop: 2-Speed Manual Landing Gear Set - Weld On - Drop Leg - Sidewind - 9-3/4" Travel - 50,000 lbs
- Shop: Stromberg Carlson Manual Landing Gear Set - Weld On - 34-7/8" Lift - 8,000 lbs
- Shop: Landing Gear Set - 36-1/2" Lift - 8,000 lbs
- Search Results: jack
- Search Results: ufp
- Search Results: ufp rotor
- Search Results: spindle
- Video: All You Need to Know About the Landing Gear Set
- Video: 2-Speed Manual Landing Gear Set Review
- Shop: Lippert Replacement RV Slide-Out Venture Actuator with 18:1 Motor - 24" Long
- Shop: Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor
- Q&A: Troubleshooting 5th Wheel Landing Gear That Blow 30-Amp Fuse
- Shop: Dexter DX7.5 Drop-N-Go Brake Actuator - Disc Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Q&A: Does 5th Wheel Landing Gear Set with 8k Capacity Have Capacity for 12k RV
- Q&A: Replacement Kwikee Step Motor For a 1999 Fleetwood Southwind Motorhome
- Q&A: Troubleshooting Atwood Landing Gear Box that Moves on Landing Gear Legs
- Video: Review of TruRyde Trailer Leaf Springs - 6 Leaf Double Eye Spring 6000 lbs Trailer Axle - TRU92FR
- Video: In-Depth Review of the Replacement Pneumatic Hose
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Recommended 7000lb Leaf Springs To Replace Dexter 072-027-00
- Q&A: Replacement Leaf Spring for 3,500 lb, 25-1/2 Inch Long Springs
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Video: Comprehensive Review: B and W Patriot 5th Wheel Trailer Hitch
- Video: Review of B and W 5th Wheel Hitch - Companion 5th Wheel Hitch - BW52AR
- Video: B&W Companion OEM 5th Wheel Hitch Manufacturer Breakdown


Cable H.
6/16/2020
What size landing gear do i need to lift a trailer with 2000 pounds of pin weight?