How to Pick Out Replacement Hub and Bearings for 1997 Triton Snowmobile Trailer
Updated 09/05/2017 | Published 09/02/2017
Question:
1997 Triton snowmobile trailer hub assemblies. Looking for combo kit for two complete hub,bearings,seal,bearing buddies? Thanks
asked by: Will W
Expert Reply:
In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.
Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.
If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.
You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: tongue box
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Search Results: l44649 hub
- Search Results: spare tire cover
- Q&A: How To Find Replacement Hubs for Triton LT PWC Trailer
- Q&A: Tire Covers for 18.5 x 8.5 Tires on Snowmobile Trailer
- Q&A: What is the Best Grease for Trailer Bearings
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Search Results: trailer hitch
- Video: Hands-On with the Hub Saver Hub and Wheel Protector
- Article: Trailer Wiring Diagrams
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Search Results: trailer hubs and drums
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Brake Controller
- Video: Measuring To Choose The Right Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Comparing Dexter and etrailer.com 7,000 Pound Electric Brake Assemblies
- Search Results: trailer wiring
on Trailer Hubs and Drums
