Water Resistance and Installation Position of Air Lift WirelessONE Compressor System AL25980

Updated 08/31/2017 | Published 08/30/2017

Question:

I have read that the manifold is water proof up to 2 feet, what about the compressor and relay. Since it is mounted so low on the rail there is a high probability of submersion especially in Floridas flash rains. If it does become water damaged from normal use how will the warranty work. Thanks

asked by: John K

Expert Reply:

The installation instructions for the Air Lift WirelessONE Compressor System # AL25980, linked for your reference, do note on page 6 that the compressor should be mounted in a "dry, protected area". Direct water splashes or other excess moisture can damage the compressor, as can high heat. Weather-related/flood issues would not be considered a product issue.

Since the compressor can be mounted in any position this gives you some leeway to place it in such a protected area, but it will have to be within 24-inches of the manifold in order to connect using the included harness.

expert reply by: Adam R