Differences between Roadmaster Tow Defenders

Question

Question:

what is difference between the two part numbers?

asked by: Richard N

0

Expert Reply:

The difference between the # RM-4700 and the # RM-4750 is being able to use them with your base plates. If you have the crossbar on your base plates you will need part # RM-4700.

The RM-4750 is not compatible with other style base plates.

expert reply by: Jameson C

0

Answer 1

Hey Jay, the etrailer High Low adapter part #e85ZV that you referenced is designed for use when towing one vehicle with another vehicle. This is what flat towing is. This is a situation where there is basically no tongue weight as all since a vehicle…

view full answer...

Answer 2

I do have a solution for you, but using an extender with a high-low adapter would be using 2 adapters and is not advisable. Hitch extenders reduce the weight rating of your hitch by 50% and will also cause more movement not to mention the torque that…

view full answer...

Answer 3

For your Blue Ox base plate, and your Blue Ox Avail Tow Bar #BX7420, you can use the Roadmaster Tow Defender Protective Screening #RM-4750. This is specifically designed to work with Blue Ox Tow Bars, and Blue Ox base plate brackets. I have included…

view full answer...

Answer 4

Hey Richard; that's a good question and I think between the two, the best option for use with your Blue Ox tow bar is definitely the Roadmaster option: - Roadmaster Tow Defender #RM-4750 There are a couple reasons I like the Tow Defender #RM-4750…

view full answer...

Answer 5

The Roadmaster Tow Defender Protective Screening #RM-4750 referenced in your question is compatible out of the box with Blue Ox tow bars and Blue Ox brackets. This will work perfectly with your Blue Ox Aventa Tow Bar, provided you also have Blue Ox…

view full answer...

Answer 6

The difference between the #RM-4700 and the #RM-4750 is being able to use them with your base plates. If you have the crossbar on your base plates you will need part #RM-4700. The RM-4750 is not compatible with other style base plates.

view full answer...

Answer 7

Roadmaster has the Tow Defender Protective Screening #RM-4750 which is compatible with Blue Ox tow bars like the Avail Non-Binding Tow Bar #BX7420. The screening will attach to the mount that fits the shank of the tow bars and also on shoulder bolt…

view full answer...

Answer 8

For your 2024 Jeep Wrangler Willy's with the Blue Ox tow bars you are going to need the Roadmaster Tow Defender #RM-4750. The Tow Defender #RM-4700 is only for units that use the Roadmaster Crossbar style connections.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Differences between Roadmaster Tow Defenders

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching