Adding an In-Line Fuse to Maxxair Deluxe

Question

Question:

I want to add an in-line fuse for this unit. What size amp fuse do I need?

asked by: Larry N

0

Expert Reply:

The MaxxAir MaxxFan Deluxe # MA00-07500K would require a 5 amp fuse.

expert reply by: Kyle S

0

Answer 1

I do have a battery charger for the batteries in your enclosed trailer but I am not aware of a device that uses energy from the rotation of the trailer's wheels for this. The best option we can offer you is the Redarc In-Vehicle BCDC Battery…

view full answer...

Answer 2

I reached out to my contact at Ventline and confirmed the correct replacement cover for your Ventline AS-13-M-V101. The replacement cover you want is #BV0554-01 in white or #BV0554-03 in smoke. I've attached video reviews of each of these as well…

view full answer...

Answer 3

Yes, John we sure do! To replace the fuses in your FanTastic Vent Fan you will need the Replacement 4 Amp Slow Burn Fuse Kit for Fantastic Fans item #DMC57FR you were looking at. This comes with two fuses that measure 1-1/4" x 1/4". The…

view full answer...

Answer 4

Typically, the wire colors are brown for running lights, green for right turn and brake lights, and yellow for left turn and brake lights. White is ground. To confirm this on a trailer you can trace the wires back to see where they terminate or take…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Adding an In-Line Fuse to Maxxair Deluxe

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching