Converting Barn Doors on an Enclosed Trailer to a Ramp

Question

Question:

I have a 6x12 enclosed trailerwith ramp doors. Can i convert to a ramp door?

asked by: Brad S

0

Expert Reply:

We don't have the ramp itself but we have some parts that may work for you. We have hinges, like # SH300, for the ramp. I've linked our complete selection for you.

We also have latches that I've linked as well.

expert reply by: Charles S

0

Answer 1

I can confirm that the Thule Snapfit Cradle Replacement Kit item #TH68NB is the correct replacement part. It fits all of Thule's roof mounted cargo boxes no matter what model. I confirmed this information with Thule. This kit will replace all…

view full answer...

Answer 2

To convert your barn door on your Wells Cargo enclosed trailer to a ramp door I would recommend you use the Universal Cam-Door Lock for Enclosed Trailers #383200 that you referenced as well as a 3/4 diameter pipe that you will need to get from a…

view full answer...

Answer 3

Trailer ramp spring #362SW61 could work provided that the interior of the trailer is wide enough for the rod (the rod can be trimmed down as low as 48 inches). The capacity of this spring is 120 pounds so it will help when both raising and lowering…

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

Hey Lars, welcome back! I can indeed confirm that the Furrion Variable Speed Chill Cube air conditioner with a heat pump is indeed really happening. They are currently available for order (02/04/26) and will be shipped out towards the middle of next…

view full answer...

Answer 10

Hello Jorge, thanks for reaching out. The etrailer Electric Trailer Jack #e55ZV should work great on your 1979 Airstream Excella 500. It uses a standard bolt pattern (3" apart on center) so as long as you can confirm this matches the current…

view full answer...

Answer 11

Hey Don, thanks for reaching out! The correct fit for your 2024 Ford F-250 with the Tremor package is the Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR. I confirmed with my contact at Hellwig that this will fit specifically with your Tremor…

view full answer...

Answer 12

Hey Steve, welcome back! The difference between these two Hellwig Adjustable Big Wig Rear Anti-Sway Bars is the fitment. The #HE94FR is designed for 4WD models and the #HE97MR is designed for 2WD models. Since your 2019 F-250 is 4WD you need the…

view full answer...

Converting Barn Doors on an Enclosed Trailer to a Ramp

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching