What Direction Should the Caliper Mounting Bracket Face on Kodiak Disc Brake Assembly, # K1HR35D
Updated 04/08/2011 | Published 04/07/2011
Question:
Does the caliper bracket mount with the tabs to the outside or the inside ? It seems to fit either way but with the tabs to the inside the tab fits nicely around the caliper. With the tab to the outside they seems to have no function. On your Youtube video you mount the tabs to the outside but is that correct?
asked by: Jeff
Expert Reply:
On the Kodiak Disc Brake Assembly, # K1HR35D, the caliper mounting bracket, far left in the picture, needs to be mounted with the tabs pointing out like in the video you have mentioned that I have also linked here for reference. The tabs will help to keep the caliper in place so that it cannot rotate forward or backward.
Product Page this Question was Asked From
Kodiak Disc Brake Assembly - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer bearings races seals caps
- Search Results: 84 spindle l44649/l68149 bearings 10~19 double lip seal
- Video: Detailed Breakdown of the Kodiak Disc Brake Assembly
- Shop: Kodiak Disc Brake Assembly - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Lippert Super Lube Dust Cap and Rubber Plug - 2.72" Diameter - Qty 2
- Shop: Lippert Complete Bearing Kit for 3.5K Trailer Axles - L44649/L68149 Bearings, L44610/L68111 Races
- Shop: Lippert Super Lube Dust Cap and Rubber Plug - 1.99" Diameter - Qty 2
- Shop: Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet and Stainless - 3,500 lbs
- Shop: Kodiak Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Dacromet and KodaGuard - 5,200 to 6,000 lbs
- Shop: Bearing Buddy Bearing Protectors - Model 2441 - Chrome Plated - Qty 2
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: How to Determine if a Torsion Axle Needs to be Replaced and Lifting a Trailer Off the Ground
- Video: All You Need to Know About the Kodiak Disc Brakes
- Video: Kodiak Disc Brake Kit: The Breakdown
- Video: Comprehensive Review: Replacement Brass Connector for Dexter Disc Brake Actuators
- Q&A: How to Wire Reverse Lock Out Solenoid on Hydraulic Trailer Brake Actuating Coupler
- Q&A: How to Bleed Brake Lines with Titan Model 60 Hydraulic Brake Actuator Without Electric Lockout
- Q&A: Does the Replacement Brass Connector for Dexter Disc Brake Actuators Fit the A-60 Models?
- Video: The Low-Down on the Kodiak Disc Brake Kit
- Video: Review of TowSmart Trailer Wiring - Trailer Connectors - TS82ZR
- Search Results: kodiak brake line kit
- Search Results: brass brake line fittings
- Search Results: surge break
- Search Results: kodiak hydraulic brake line kit
- Search Results: brake line fittings
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Shop: Trailer Wiring
on Accessories and Parts
